PDS_VERSION_ID = PDS3 LABEL_REVISION_NOTE = " 2006-03-02 DI:McLaughlin Added columns for multi-valued keywords in labels; 2006-08-22 DI:McLaughlin Resolved liens from Apr 2006 peer review; " RECORD_TYPE = "FIXED_LENGTH" RECORD_BYTES = 1661 FILE_RECORDS = 564 ^HEADER = ("INDEX.TAB",1) ^INDEX_TABLE = ("INDEX.TAB",3) DATA_SET_ID = "DIF-CAL-MRI-2-9P-CRUISE-V1.0" PRODUCT_NAME = "DI MRI RAW 9P CRUISE INDEX TABLE" PRODUCT_ID = "DIMV9P_1000_INDEX_TABLE" INSTRUMENT_HOST_NAME = "DEEP IMPACT FLYBY SPACECRAFT" INSTRUMENT_NAME = "DEEP IMPACT MEDIUM RESOLUTION INSTRUMENT - VISIBLE CCD" TARGET_NAME = "CALIBRATION" START_TIME = 2005-01-14T23:53:53.846 STOP_TIME = 2005-04-27T19:15:24.310 PRODUCT_CREATION_TIME = 2006-03-01T14:00:00 OBJECT = HEADER HEADER_TYPE = "COLUMN_LABEL" BYTES = 3322 RECORDS = 2 END_OBJECT = HEADER OBJECT = INDEX_TABLE INTERCHANGE_FORMAT = "ASCII" INDEX_TYPE = "SINGLE" NAME = "INDEX_TABLE" ROWS = 562 ROW_BYTES = 1661 COLUMNS = 111 DESCRIPTION = "This index table contains parameters that describe each data file in this data set. All geometry-related keywords were calculated using the mid-point UTC time of the observation. " OBJECT = COLUMN COLUMN_NUMBER = 1 NAME = "PATH_NAME" START_BYTE = 2 BYTES = 24 DATA_TYPE = "CHARACTER" FORMAT = "A24" DESCRIPTION = "This parameter provides the directory path to the data product." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 2 NAME = "FILE_NAME" START_BYTE = 30 BYTES = 31 DATA_TYPE = "CHARACTER" FORMAT = "A31" DESCRIPTION = "This parameter provides the name of the label file for this data product." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 3 NAME = "MISSION_ACTIVITY_TYPE" START_BYTE = 65 BYTES = 40 DATA_TYPE = "CHARACTER" FORMAT = "A40" DESCRIPTION = "This parameter provides the mission activity for this observation, such as APRIL SCIENCE CAL or IMPACT IMAGING." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 4 NAME = "OBSERVATION_TYPE" START_BYTE = 109 BYTES = 40 DATA_TYPE = "CHARACTER" FORMAT = "A40" DESCRIPTION = "This parameter provides the type or purpose of the observation, such as DARK or CONTINUOUS COMET IMAGING." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 5 NAME = "TARGET_NAME" START_BYTE = 153 BYTES = 21 DATA_TYPE = "CHARACTER" FORMAT = "A21" DESCRIPTION = "This parameter identifies the general, intended target of the observation. The value is CALIBRATION because all cruise data were calibration frames. The TARGET_DESC column identifies the calibration target." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 6 NAME = "TARGET_DESC" START_BYTE = 178 BYTES = 21 DATA_TYPE = "CHARACTER" FORMAT = "A21" DESCRIPTION = "This parameter describes the intended target of the observation. If the target was within several fields-of-view, the actual target name was used although the target may not be in the image. Calibration targets for Deep Impact include: 16 CYG A : Star (HD 186408 or SAO 31898) 47 TUC : Globular cluster (NGC 104) ACHERNAR : Emission-line star (alf Eri, HD 10144, or SAO 232481) BETA HYI : Variable star (HD 2151 or SAO 255670) CANOPUS : Star (alf Car, HD 45348, or SAO 234480) DARK : Dark frame EARTH : Earth HD 60753 : Star (SAO 235291) HD 79447 : Star (SAO 250471 or i Car) IC 2391 : Open galactic cluster JUPITER : Jupiter M11 : Open galactic cluster (Wild Duck Cluster) MOON : Moon NGC 3114 : Open galactic cluster NGC 3532 : Cluster of stars NGC 6543 : Cluster of stars NGC 7027 : Planetary nebula (HD 201272 or SAO 50463) SIRIUS : Spectroscopic binary (HD 48915 or SAO 151881) SKY : Sky frame STAR : Unidentified star STIM LAMP : Light frame using an internal calibration lamp VEGA : Variable star (alpha Lyr, HD 172167, or SAO 67174) " END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 7 NAME = "FITS_FILE_NAME" START_BYTE = 203 BYTES = 31 DATA_TYPE = "CHARACTER" FORMAT = "A31" DESCRIPTION = "This parameter provides the name of the FITS file for this data product." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 8 NAME = "START_TIME" START_BYTE = 238 BYTES = 23 DATA_TYPE = "CHARACTER" FORMAT = "A23" DESCRIPTION = "This parameter provides the UTC start time of the image at the spacecraft. The value includes corrections for the light-travel time from the target to the spacecraft and stellar aberration. The format is YYYY-MM-DDTHH:MM:SS.sss." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 9 NAME = "SPACECRAFT_CLOCK_START_COUNT" START_BYTE = 265 BYTES = 16 DATA_TYPE = "CHARACTER" FORMAT = "A16" DESCRIPTION = "This parameter provides the spacecraft clock count at the start of the image. The format is 1/nnnnnnnnnn.sss where 1/ is the clock partition, nnnnnnnnnn is the on-board seconds count and sss is the count of fractions of a second where one fraction is 1/256 of a second." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 10 NAME = "OBSERVATION_ID" START_BYTE = 285 BYTES = 7 DATA_TYPE = "CHARACTER" FORMAT = "A7" DESCRIPTION = "This parameter provides an exposure number or ID for an image. Exposure IDs are not unique; several were reused during the flight. Multiple images may be commanded with one exposure id and are sequentially numbered using IMAGE_NUMGER. For example, an HRII scan consists of multiple images within one exposure ID." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 11 NAME = "IMAGE_NUMBER" START_BYTE = 296 BYTES = 3 DATA_TYPE = "CHARACTER" FORMAT = "A3" DESCRIPTION = "This parameter provides the sequential number for this image with an exposure ID. For an HRII scan, this number increases sequentially from 001." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 12 NAME = "COMMANDED_IMAGE_COUNT" START_BYTE = 302 BYTES = 4 DATA_TYPE = "ASCII_INTEGER" FORMAT = "I4" DESCRIPTION = "This parameter provides the total number of images commanded for an exposure ID." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 13 NAME = "INSTRUMENT_MODE_ID" START_BYTE = 308 BYTES = 1 DATA_TYPE = "ASCII_INTEGER" FORMAT = "I1" DESCRIPTION = "This parameter identifies the mode of the instrument, also known as image mode: For HRII: MinExp X-Size Y-Size #Images Bin Mode Name (sec) (pix) (pix) Output Type Comments ---- ------ ------ ------ ------- ---- ---- ----------------- 1 BINFF 2.861 512 256 1 2x2 2 BINSF1 1.432 512 126 1 2x2 3 BINSF2 0.717 512 64 1 2x2 4 UBFF 2.861 1024 512 1 1x1 5 ALTFF 1.432 512 256 1 2x2 6 DIAG 1.432 1024 512 2 1x1 Reset,data frames 7 MEMCK 1.432 1024 512 1 1x1 Memory check For HRIV, MRI, and ITS: MinExp Xsize Ysize Bin Mode Name (ms) (pix) (pix) Type Comments ---- ----- ----- ----- ----- ---- -------------------------- 1 FF 3.5 1024 1024 1x1 Full-frame (FF), shuttered 2 SF1 3.5 512 512 1x1 Sub-frame (SF), shuttered 3 SF2S 3.5 256 256 1x1 SF, shuttered 4 SF2NS 217.8 256 256 1x1 SF, not shuttered 5 SF3S 3.5 128 128 1x1 SF, shuttered 6 SF3NS 98.4 128 128 1x1 SF, not shuttered 7 SF4O 47.4 64 64 1x1 SF, not shuttered 8 SF4NO 47.4 64 64 1x1 SF, not shuttered 9 FFD 3.5 1024 1024 1x1 FF, shuttered; Diagnostic Number of Overclock Mode Name Rows(X) Cols(Y) ---- ------ ------- ------- 1 FF 8 8 2 SF1 4 4 3 SF2S 4 4 4 SF2NS 4 4 5 SF3S 2 2 6 SF3NS 2 2 7 SF4O 0 1 8 SF4NO 0 0 9 FFD 8 8 " END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 14 NAME = "COMPRESSED_IMAGE_VALUE" START_BYTE = 312 BYTES = 12 DATA_TYPE = "CHARACTER" FORMAT = "A12" DESCRIPTION = "This parameter provides image compression information: UNCOMPRESSED = Image was never compressed by flight software COMPRESSED = Image was compressed onboard the spacecraft and was received on the ground as compressed; all raw compressed data are archived as compressed DECOMPRESSED = Image was decompressed by the calibration pipeline; only reduced data are decompressed " END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 15 NAME = "COMPRESSOR_ID" START_BYTE = 328 BYTES = 3 DATA_TYPE = "CHARACTER" FORMAT = "A3" DESCRIPTION = "This parameter provides the number that identifies the lookup table used in flight to compress an image. The calibration pipeline uses the same lookup table to decompress reduced data. Valid values are 0 to 3." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 16 NAME = "FILTER_NUMBER" START_BYTE = 335 BYTES = 3 DATA_TYPE = "CHARACTER" FORMAT = "A3" DESCRIPTION = "This parameter provides the mission-defined number for a particular HRIV or MRI filter used for an observation. The filter is determined by the position of the Hall Sensor for the filter wheel. If the position could not be determined, this parameter is set to UNK (unknown). This parameter is set to N/A (not applicable) for HRII and ITS because these instruments do not have filters. The possible values for this parameter are: For HRIV: Fil Filter Center Width # Name (nm) (nm) Comments --- ---------- ----- ----- ------------------------------- N/A N/A N/A Used for HRII and ITS UNK UNK UNK Filter position unknown 0,1 CLEAR1 650 >700 Uncoated and not band limited 2 BLUE 450 100 3 GREEN 550 100 4 VIOLET 350 100 Shortpass coating 5 IR 950 100 Longpass 6 CLEAR6 650 >700 Uncoated and not band limited 7 RED 750 100 8 NIR 850 100 9 ORANGE 650 100 For MRI: Fil Filter Center Width # Name (nm) (nm) Comments --- ---------- ----- ----- ------------------------------------ N/A N/A N/A Used for HRII and ITS UNK UNK UNK Filter position unknown 0,1 CLEAR1 650 >700 For context; not band limited 2 C2 514 11.8 For C2 in coma 3 GREEN_CONT 526 5.6 For dust in coma 4 RED 750 100 For context 5 IR 950 100 For context; longpass 6 CLEAR6 600 >700 For context; not band limited 7 CN 387 6.2 For CN in coma 8 VIOLET_CONT 345 6.8 For dust in coma 9 OH 309 6.2 For OH in coma " END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 17 NAME = "FILTER_NAME" START_BYTE = 342 BYTES = 11 DATA_TYPE = "CHARACTER" FORMAT = "A11" DESCRIPTION = "This parameter provides the name for a particular HRIV or MRI filter. If the filter could not be determined, this parameter is set to UNK (unknown). For HRII and ITS, this parameter is set to N/A (not applicable)." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 18 NAME = "CENTER_FILTER_WAVELENGTH" START_BYTE = 357 BYTES = 3 DATA_TYPE = "CHARACTER" FORMAT = "A3" UNIT = "NANOMETER" DESCRIPTION = "This parameter provides the center wavelength of the filter. If the filter could not be determined, this parameter is set to UNK (unknown). For HRII and ITS, this parameter is set to N/A (not applicable)." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 19 NAME = "INTEGRATION_DURATION" START_BYTE = 363 BYTES = 11 DATA_TYPE = "ASCII_REAL" FORMAT = "F11.3" UNIT = "MILLISECOND" DESCRIPTION = "This parameter provides the total integration or true exposure time for an image: For HRII modes: integration duration = minimum exposure duration + commanded exposure duration For shuttered VIS image modes (1, 2, 3, 5, and 9): integration duration = minimum exposure duration + commanded exposure duration For unshuttered VIS image modes (4, 6, 7, and 8): integration duration = minimum exposure duration + commanded exposure duration + delay duration + (0.5 ms if commanded exposure duration is greater than 0 ms) " END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 20 NAME = "IMAGE_MID_TIME" START_BYTE = 377 BYTES = 23 DATA_TYPE = "CHARACTER" FORMAT = "A23" DESCRIPTION = "This parameter provides the UTC time, at the spacecraft, for the mid-point of an observation. The value includes corrections for the light-travel time from the target to the spacecraft and stellar aberration. The format is YYYY-MM-DDTHH:MM:SS.sss." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 21 NAME = "STOP_TIME" START_BYTE = 404 BYTES = 23 DATA_TYPE = "CHARACTER" FORMAT = "A23" DESCRIPTION = "This parameter provides the UTC time, at the spacecraft, for the end of an observation. The value includes corrections for the light-travel time from the target to the spacecraft and stellar aberration. The format is YYYY-MM-DDTHH:MM:SS.sss." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 22 NAME = "SPACECRAFT_CLOCK_MID_COUNT" START_BYTE = 431 BYTES = 16 DATA_TYPE = "CHARACTER" FORMAT = "A16" DESCRIPTION = "This parameter provides the spacecraft clock count at the mid-point of an observation. The format is 1/nnnnnnnnnn.sss where 1/ is the clock partition, nnnnnnnnnn is the on-board seconds count and sss is the count of fractions of a second where one fraction is 1/256 of a second." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 23 NAME = "SPACECRAFT_CLOCK_STOP_COUNT" START_BYTE = 451 BYTES = 16 DATA_TYPE = "CHARACTER" FORMAT = "A16" DESCRIPTION = "This parameter provides the spacecraft clock count at the end of an observation. The format is 1/nnnnnnnnnn.sss where 1/ is the clock partition, nnnnnnnnnn is the on-board seconds count and sss is the count of fractions of a second where one fraction is 1/256 of a second." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 24 NAME = "START_JULIAN_DATE_VALUE" START_BYTE = 470 BYTES = 15 DATA_TYPE = "ASCII_REAL" FORMAT = "F15.7" DESCRIPTION = "This parameter provides the full Julian date, at the spacecraft, for start of an observation. The value includes corrections for the light-travel time from the target to the spacecraft and stellar aberration." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 25 NAME = "STOP_JULIAN_DATE_VALUE" START_BYTE = 487 BYTES = 15 DATA_TYPE = "ASCII_REAL" FORMAT = "F15.7" DESCRIPTION = "This parameter provides the full Julian date, at the spacecraft, for end of an observation. The value includes corrections for the light-travel time from the target to the spacecraft and stellar aberration." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 26 NAME = "MID_JULIAN_DATE_VALUE" START_BYTE = 504 BYTES = 15 DATA_TYPE = "ASCII_REAL" FORMAT = "F15.7" DESCRIPTION = "This parameter provides the full Julian date, at the spacecraft, for mid-point of an observation. The value includes corrections for the light-travel time from the target to the spacecraft and stellar aberration." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 27 NAME = "EARTH_RECEIVED_TIME" START_BYTE = 522 BYTES = 23 DATA_TYPE = "CHARACTER" FORMAT = "A23" DESCRIPTION = "This parameter provides the UTC time, at the Earth, for the mid-point of an observation. This is the time when an Earth-based observer could expect to see the event. The format is YYYY-MM-DDTHH:MM:SS.sss." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 28 NAME = "TIME_FROM_IMPACT_VALUE" START_BYTE = 548 BYTES = 16 DATA_TYPE = "ASCII_REAL" FORMAT = "F16.3" UNIT = "SECONDS" DESCRIPTION = "This parameter provides the estimated time from impact based on the nominal impact time of 2005-07-04 05:44:35.821 UTC (Earth-received time 05:52:02 UTC). A negative value indicates a pre-impact observation while positive value is post-impact." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 29 NAME = "INSTR_CONTROLLER_PROCESSING_BOARD_TEMP" START_BYTE = 566 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the temperature of the Instrument Controller processing board." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 30 NAME = "CCD_SIGNAL_PROCESSING_BOARD_TEMP" START_BYTE = 575 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the temperature of the CCD signal processing board." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 31 NAME = "IR_SIGNAL_PROCESSING_BOARD_TEMP" START_BYTE = 584 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the temperature of the IR signal processing board." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 32 NAME = "LOW_VOLTAGE_POWER_SUPPLY_PROC_BOARD_TEMP" START_BYTE = 593 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the temperature of the Low Voltage Power Supply (LVPS) signal processing board." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 33 NAME = "CCD_PREAMP_BOX_TEMP" START_BYTE = 602 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the temperature of the CCD preamp component." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 34 NAME = "CCD_ONCHIP_SENSOR_TEMP" START_BYTE = 611 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the temperature of the CCD as measured by the on-chip sensor." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 35 NAME = "OPTICAL_BENCH_TEMP" START_BYTE = 620 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "For the IR focal plane array (FPA), this parameter provides the average temperature of the two prisms. For the CCDs, it provides the temperature of the optical components." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 36 NAME = "PRIMARY_MIRROR_TEMP" START_BYTE = 629 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the temperature of the primary mirror." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 37 NAME = "SECONDARY_MIRROR_TEMP" START_BYTE = 638 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the temperature of the secondary mirror." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 38 NAME = "STRUCTURE_COVER_TEMP" START_BYTE = 647 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "For HRII/HRIV, this parameter provides the temperature of the cover of spectral imaging module. For ITS and MRI, it provides the temperature of structure cover." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 39 NAME = "IR_FPA_ON_CHIP_SENSOR_TEMP" START_BYTE = 656 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KELVIN" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the temperature of the IR FPA as measured by the on-chip sensor." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 40 NAME = "CCD_OFFSET_FROM_ADC_REF_QUAD_A" START_BYTE = 665 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the offset of quadrant A of the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 41 NAME = "CCD_OFFSET_FROM_ADC_REF_QUAD_B" START_BYTE = 674 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the offset of quadrant B of the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 42 NAME = "CCD_OFFSET_FROM_ADC_REF_QUAD_C" START_BYTE = 683 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the offset of quadrant C of the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 43 NAME = "CCD_OFFSET_FROM_ADC_REF_QUAD_D" START_BYTE = 692 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the offset of quadrant D of the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 44 NAME = "CCD_OUTPUT_AMP_DRAIN_QUAD_A" START_BYTE = 701 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the output drain for quadrant A of the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 45 NAME = "CCD_OUTPUT_AMP_DRAIN_QUAD_B" START_BYTE = 710 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the output drain for quadrant B of the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 46 NAME = "CCD_OUTPUT_AMP_DRAIN_QUAD_C" START_BYTE = 719 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the output drain for quadrant C of the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 47 NAME = "CCD_OUTPUT_AMP_DRAIN_QUAD_D" START_BYTE = 728 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the output drain for quadrant D of the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 48 NAME = "CCD_SERIAL_CLOCK_POSITIVE" START_BYTE = 737 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the positive voltage of the serial (line samples) clock for the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 49 NAME = "CCD_SERIAL_CLOCK_NEGATIVE" START_BYTE = 746 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the negative voltage of the serial (line samples) clock for the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 50 NAME = "CCD_PARALLEL_CLOCK_POSITIVE" START_BYTE = 755 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the positive voltage of the parallel (lines) clock for the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 51 NAME = "CCD_PARALLEL_CLOCK_NEGATIVE" START_BYTE = 764 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the negative voltage of the parallel (lines) clock for the CCD array." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 52 NAME = "IR_RESET" START_BYTE = 773 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "Provides the voltage used for resetting the IR FPA" END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 53 NAME = "IR_SUBSTRATE" START_BYTE = 782 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the voltage of the substrate for the IR FPA." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 54 NAME = "IR_BIASGATE" START_BYTE = 791 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the voltage of the bias gate for the IR FPA." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 55 NAME = "IR_CALIB_LAMP" START_BYTE = 800 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "VOLT" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the voltage used for the internal calibration lamp of the IR FPA. The lamp was damaged during the ground calibration test, thermal-vacuum 4. The lamp was not operational during flight." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 56 NAME = "HORIZONTAL_PIXEL_SCALE" START_BYTE = 809 BYTES = 12 DATA_TYPE = "ASCII_REAL" FORMAT = "F12.3" UNIT = "METERS/PIXEL" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the horizontal pixel scale for a CCD image. The horizontal direction is associated with the fastest varying index of the FITS image (line samples). This parameter is set to the not_applicable_constant for HRII images." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 57 NAME = "VERTICAL_PIXEL_SCALE" START_BYTE = 823 BYTES = 12 DATA_TYPE = "ASCII_REAL" FORMAT = "F12.3" UNIT = "METERS/PIXEL" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the vertical pixel scale for a CCD image. The vertical direction is associated with the slowest varying index of the FITS image (lines). This parameter is set to the not_applicable_constant for HRII images." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 58 NAME = "RIGHT_ASCENSION" START_BYTE = 837 BYTES = 13 DATA_TYPE = "ASCII_REAL" FORMAT = "F13.9" UNIT = "DEGREES" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the EME J2000 right ascension where the boresight was pointing." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 59 NAME = "DECLINATION" START_BYTE = 852 BYTES = 13 DATA_TYPE = "ASCII_REAL" FORMAT = "F13.9" UNIT = "DEGREES" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the EME J2000 declination where the boresight was pointing." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 60 NAME = "CELESTIAL_NORTH_CLOCK_ANGLE" START_BYTE = 867 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.4" UNIT = "DEGREES" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the celestial north clock angle in the image. The angle is measured clockwise from the top of the image when displayed with the fastest-varying index increasing to the right and the slowest-varying index up." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 61 NAME = "SOLAR_NORTH_CLOCK_ANGLE" START_BYTE = 877 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "DEGREES" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the ecliptic north clock angle in the image. The angle is measured clockwise from the top of the image when displayed with the fastest-varying index increasing to the right and the slowest-varying index up." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 62 NAME = "INST_EMEJ2000_QUATERNION_COS" START_BYTE = 886 BYTES = 15 DATA_TYPE = "ASCII_REAL" FORMAT = "F15.12" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the first component, a cosine, of a four-component representation of a rotation matrix. This quaternion rotates vectors defined in the instrument frame into the Earth Mean Equator (EME) J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 63 NAME = "INST_EMEJ2000_QUATERNION_SIN1" START_BYTE = 903 BYTES = 15 DATA_TYPE = "ASCII_REAL" FORMAT = "F15.12" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the second component, a sine, of a four-component representation of a rotation matrix. This quaternion rotates vectors defined in the instrument frame into the Earth Mean Equator (EME) J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 64 NAME = "INST_EMEJ2000_QUATERNION_SIN2" START_BYTE = 920 BYTES = 15 DATA_TYPE = "ASCII_REAL" FORMAT = "F15.12" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the third component, a sine, of a four-component representation of a rotation matrix. This quaternion rotates vectors defined in the instrument frame into the Earth Mean Equator (EME) J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 65 NAME = "INST_EMEJ2000_QUATERNION_SIN3" START_BYTE = 937 BYTES = 15 DATA_TYPE = "ASCII_REAL" FORMAT = "F15.12" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the fourth component, a sine, of a four-component representation of a rotation matrix. This quaternion rotates vectors defined in the instrument frame into the Earth Mean Equator (EME) J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 66 NAME = "INST_EMEJ2000_VELOCITY_X" START_BYTE = 954 BYTES = 20 DATA_TYPE = "ASCII_REAL" FORMAT = "F20.17" UNIT = "RAD/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the x component of the angular velocity about axes of the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 67 NAME = "INST_EMEJ2000_VELOCITY_Y" START_BYTE = 976 BYTES = 20 DATA_TYPE = "ASCII_REAL" FORMAT = "F20.17" UNIT = "RAD/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the y component of the angular velocity about axes of the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 68 NAME = "INST_EMEJ2000_VELOCITY_Z" START_BYTE = 998 BYTES = 20 DATA_TYPE = "ASCII_REAL" FORMAT = "F20.17" UNIT = "RAD/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the z component of the angular velocity about axes of the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 69 NAME = "TARGET_SC_POSITION_X" START_BYTE = 1020 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the x component of the position vector from the target to the spacecraft in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 70 NAME = "TARGET_SC_POSITION_Y" START_BYTE = 1036 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the y component of the position vector from the target to the spacecraft in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 71 NAME = "TARGET_SC_POSITION_Z" START_BYTE = 1052 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the z component of the position vector from the target to the spacecraft in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 72 NAME = "TARGET_SC_VELOCITY_X" START_BYTE = 1068 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.4" UNIT = "KM/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the x component of the velocity vector from the target to the spacecraft in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 73 NAME = "TARGET_SC_VELOCITY_Y" START_BYTE = 1078 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.4" UNIT = "KM/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the y component of the velocity vector from the target to the spacecraft in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 74 NAME = "TARGET_SC_VELOCITY_Z" START_BYTE = 1088 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.4" UNIT = "KM/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the z component of the velocity vector from the target to the spacecraft in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 75 NAME = "TARGET_CENTER_DISTANCE" START_BYTE = 1098 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.4" UNIT = "KILOMETERS" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the distance from the spacecraft to the center of the target. For an impact image, this distance is measured from the spacecraft to the impact site on the surface of comet 9P/Tempel 1." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 76 NAME = "SC_SUN_POSITION_X" START_BYTE = 1114 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the x component of the position vector from the spacecraft to the Sun in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 77 NAME = "SC_SUN_POSITION_Y" START_BYTE = 1130 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the y component of the position vector from the spacecraft to the Sun in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 78 NAME = "SC_SUN_POSITION_Z" START_BYTE = 1146 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the z component of the position vector from the spacecraft to the Sun in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 79 NAME = "SPACECRAFT_SOLAR_DISTANCE" START_BYTE = 1162 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KILOMETERS" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the distance from the spacecraft to the Sun." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 80 NAME = "TARGET_SUN_POSITION_X" START_BYTE = 1178 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the x component of the position vector from the target to the Sun in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 81 NAME = "TARGET_SUN_POSITION_Y" START_BYTE = 1194 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the y component of the position vector from the target to the Sun in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 82 NAME = "TARGET_SUN_POSITION_Z" START_BYTE = 1210 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the z component of the position vector from the target to the Sun in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 83 NAME = "TARGET_SUN_VELOCITY_X" START_BYTE = 1226 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.4" UNIT = "KM/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the x component of the velocity vector from the target to the Sun in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 84 NAME = "TARGET_SUN_VELOCITY_Y" START_BYTE = 1236 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.4" UNIT = "KM/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the y component of the velocity vector from the target to the Sun in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 85 NAME = "TARGET_SUN_VELOCITY_Z" START_BYTE = 1246 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.4" UNIT = "KM/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the z component of the velocity vector from the target to the Sun in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 86 NAME = "TARGET_HELIOCENTRIC_DISTANCE" START_BYTE = 1256 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the distance from the target to the Sun." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 87 NAME = "SC_EARTH_POSITION_X" START_BYTE = 1272 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the x component of the position vector from the spacecraft to the Earth in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 88 NAME = "SC_EARTH_POSITION_Y" START_BYTE = 1288 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the y component of the position vector from the spacecraft to the Earth in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 89 NAME = "SC_EARTH_POSITION_Z" START_BYTE = 1304 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the z component of the position vector from the spacecraft to the Earth in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 90 NAME = "SC_GEOCENTRIC_DISTANCE" START_BYTE = 1320 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the distance from the spacecraft to the Earth." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 91 NAME = "EARTH_TARGET_POSITION_X" START_BYTE = 1336 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the x component of the position vector from the Earth to the target in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 92 NAME = "EARTH_TARGET_POSITION_Y" START_BYTE = 1352 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the y component of the position vector from the Earth to the target in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 93 NAME = "EARTH_TARGET_POSITION_Z" START_BYTE = 1368 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the z component of the position vector from the Earth to the target in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 94 NAME = "EARTH_TARGET_VELOCITY_X" START_BYTE = 1384 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.4" UNIT = "KM/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the x component of the velocity vector from the Earth to the target in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 95 NAME = "EARTH_TARGET_VELOCITY_Y" START_BYTE = 1394 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.4" UNIT = "KM/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the y component of the velocity vector from the Earth to the target in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 96 NAME = "EARTH_TARGET_VELOCITY_Z" START_BYTE = 1404 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.4" UNIT = "KM/S" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the z component of the velocity vector from the Earth to the target in the EME J2000 reference frame." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 97 NAME = "TARGET_GEOCENTRIC_DISTANCE" START_BYTE = 1414 BYTES = 14 DATA_TYPE = "ASCII_REAL" FORMAT = "F14.3" UNIT = "KM" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the distance from the target to the Earth." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 98 NAME = "PHASE_ANGLE" START_BYTE = 1430 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "DEGREES" NOT_APPLICABLE_CONSTANT = -1.E32 MISSING_CONSTANT = 1.E32 DESCRIPTION = "This parameter provides the angle between the Sun, the target, and the observer (instrument boresight)." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 99 NAME = "MINIMUM_PIXEL_VALUE" START_BYTE = 1439 BYTES = 8 DATA_TYPE = "ASCII_INTEGER" FORMAT = "I8" UNIT = "DATA NUMBER" DESCRIPTION = "This parameter provides the minimum of the pixel values in the image array. For VIS images, pixels located in the overclock rows and columns along the edges of the image are not included. For IR images, all pixels are included." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 100 NAME = "MAXIMUM_PIXEL_VALUE" START_BYTE = 1449 BYTES = 8 DATA_TYPE = "ASCII_INTEGER" FORMAT = "I8" UNIT = "DATA NUMBER" DESCRIPTION = "This parameter provides the maximum of the pixel values in the image array. For VIS images, pixels located in the overclock rows and columns along the edges of the image are not included. For IR images, all pixels are included." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 101 NAME = "MEDIAN_PIXEL_VALUE" START_BYTE = 1459 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.1" UNIT = "DATA NUMBER" DESCRIPTION = "This parameter provides the median of the pixel values in the image array. For VIS images, pixels located in the overclock rows and columns along the edges of the image are not included. For IR images, all pixels are included." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 102 NAME = "STANDARD_DEVIATION_PIXEL_VALUE" START_BYTE = 1469 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.1" UNIT = "DATA NUMBER" DESCRIPTION = "This parameter provides the standard deviation of the pixel values in the image array. For VIS images, pixels located in the overclock rows and columns along the edges of the image are not included. For IR images, all pixels are included." END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 103 NAME = "REDUCTION_LEVEL" START_BYTE = 1480 BYTES = 6 DATA_TYPE = "CHARACTER" FORMAT = "A6" DESCRIPTION = "This parameter provides the type or level of data reduction: RAW = Raw data in units of data number RADREV = Reduced, uncleaned data in units of radiance; reduction steps can be reversed to get back to raw DN RAD = Reduced and irreversibly cleaned data in units of radiance IF = Reduced and irreversibly cleaned data in units of I/F (radiance image divided by the solar spectrum at the target heliocentric distance, then multiplied by pi) " END_OBJECT = COLUMN OBJECT = COLUMN COLUMN_NUMBER = 104 NAME =