PDS_VERSION_ID        = PDS3                                                  
                                                                              
RECORD_TYPE           = FIXED_LENGTH                                          
RECORD_BYTES          = 40                                                    
FILE_RECORDS          = 7                                                     
                                                                              
^TABLE                = "MAPSGRSFIG10.TAB"                                    
                                                                              
DATA_SET_ID           = "NEAR-A-GRS-3-EDR-EROS/ORBIT-V1.0"                    
PRODUCT_NAME          = "EVANS ET AL. (2001) FIGURE 10"                       
PRODUCT_ID            = GRSMAPSFIG10                                          
                                                                              
INSTRUMENT_HOST_NAME  = "NEAR EARTH ASTEROID RENDEZVOUS"                      
INSTRUMENT_NAME       = "NEAR GAMMA-RAY SPECTROMETER"                         
TARGET_NAME           = "EROS"                                                
PRODUCT_CREATION_TIME = 2001-09-24                                            
                                                                              
OBJECT     = TABLE                                                            
  INTERCHANGE_FORMAT = ASCII                                                  
  NAME               = SURFACE_EFFICIENCY                                     
  ROWS               = 7                                                      
  ROW_BYTES          = 40                                                     
  COLUMNS            = 6                                                      
  DESCRIPTION        = "Plot of NEAR NaI Surface Efficiency from              
      Evans, et al. (2001), submitted to Meteoritics and Planetary            
      Science.                                                                
                                                                              
      This plot shows the calculated total efficiencies for the NaI           
      photopeak, first escape and second escape spectra. The three            
      separate lines are stored in this table in parallel, with the           
      first two columns defining the full energy line; the next two           
      the first escape line; and the last two the second escape line.         
      Note that there are only three points in the last two lines,            
      i.e., columns 2-4 are blank in the last four records of this            
      file.                                                                   
    "                                                                         
                                                                              
  OBJECT     = COLUMN                                                         
    COLUMN_NUMBER = 1                                                         
    NAME          = ENERGY_FULL                                               
    START_BYTE    = 1                                                         
    BYTES         = 5                                                         
    DATA_TYPE     = ASCII_INTEGER                                             
    FORMAT        = "I5"                                                      
    UNIT          = "KEV"                                                     
    DESCRIPTION   = "Energy corresponding to the 'Full Energy'                
      plot"                                                                   
                                                                              
  END_OBJECT = COLUMN                                                         
                                                                              
                                                                              
  OBJECT     = COLUMN                                                         
    COLUMN_NUMBER = 2                                                         
    NAME          = EFFICIENCY_FULL                                           
    START_BYTE    = 7                                                         
    BYTES         = 6                                                         
    DATA_TYPE     = ASCII_REAL                                                
    FORMAT        = "F6.4"                                                    
    DESCRIPTION   = "Intrinisic efficiency for the 'Full Energy'              
      plot"                                                                   
  END_OBJECT = COLUMN                                                         
                                                                              
  OBJECT     = COLUMN                                                         
    COLUMN_NUMBER = 3                                                         
    NAME          = ENERGY_FIRST_ESCAPE                                       
    START_BYTE    = 15                                                        
    BYTES         = 4                                                         
    DATA_TYPE     = ASCII_INTEGER                                             
    FORMAT        = "I4"                                                      
    UNIT          = "KEV"                                                     
    DESCRIPTION   = "Energy corresponding to the 'First Escape'               
      plot"                                                                   
                                                                              
  END_OBJECT = COLUMN                                                         
                                                                              
                                                                              
  OBJECT     = COLUMN                                                         
    COLUMN_NUMBER = 4                                                         
    NAME          = EFFICIENCY_FIRST_ESCAPE                                   
    START_BYTE    = 20                                                        
    BYTES         = 6                                                         
    DATA_TYPE     = ASCII_REAL                                                
    FORMAT        = "F6.4"                                                    
    DESCRIPTION   = "Intrinisic efficiency for the 'First Escape'             
      plot"                                                                   
  END_OBJECT = COLUMN                                                         
                                                                              
  OBJECT     = COLUMN                                                         
    COLUMN_NUMBER = 5                                                         
    NAME          = ENERGY_SECOND_ESCAPE                                      
    START_BYTE    = 28                                                        
    BYTES         = 4                                                         
    DATA_TYPE     = ASCII_REAL                                                
    FORMAT        = "I4"                                                      
    UNIT          = "KEV"                                                     
    DESCRIPTION   = "Energy corresponding to the 'Second Escape'              
      plot"                                                                   
                                                                              
  END_OBJECT = COLUMN                                                         
                                                                              
                                                                              
  OBJECT     = COLUMN                                                         
    COLUMN_NUMBER = 6                                                         
    NAME          = EFFICIENCY_SECOND_ESCAPE                                  
    START_BYTE    = 33                                                        
    BYTES         = 6                                                         
    DATA_TYPE     = ASCII_INTEGER                                             
    FORMAT        = "F6.4"                                                    
    DESCRIPTION   = "Intrinisic efficiency for the 'Second Escape'            
      plot"                                                                   
  END_OBJECT = COLUMN                                                         
                                                                              
END_OBJECT = TABLE                                                            
                                                                              
END