PDS_VERSION_ID = PDS3 RECORD_TYPE = STREAM RECORD_BYTES = 316 FILE_RECORDS = 125 ^HEADER = "NH_HELIOCENTRIC_SW_2015-07-14.CSV" ^SPREADSHEET = ( "NH_HELIOCENTRIC_SW_2015-07-14.CSV", 2 ) DATA_SET_ID = "NH-P-SWAP-5-DERIVED-SOLARWIND-V1.0" INSTRUMENT_HOST_NAME = "NEW HORIZONS" INSTRUMENT_HOST_ID = "NH" INSTRUMENT_NAME = "SOLAR WIND AROUND PLUTO" INSTRUMENT_ID = "SWAP" TARGET_NAME = "SOLAR WIND" START_TIME = 2015-07-14T12:04:17.975 STOP_TIME = 2015-07-14T14:14:25.974 SPACECRAFT_CLOCK_START_COUNT = "0299181377:09920" SPACECRAFT_CLOCK_STOP_COUNT = "0299189185:09820" PRODUCT_ID = "NH_HELIOCENTRIC_SW_2015-07-14" PRODUCT_NAME = "SWAPSOLARWINDHELIO" PRODUCT_CREATION_TIME = 2016-08-17T00:00:00 DESCRIPTION = " The Comma-Separated Values (CSV) file provides the proton density, speed, temperature, dynamic pressure and thermal pressure of the solar wind. The position of the spacecraft is given in 3 Sun-centered heliospheric coordinate systems, calculated at the mid-point of the observation. These solar wind parameters were derived using a full instrument response to forward model the count rates measured with the Solar Wind Around Pluto (SWAP) instrument on the New Horizons (NH) spacecraft. Refer to SWAP.CAT in the CATALOG/ directory of this data set for information about the SWAP instrument. Each row represents solar wind parameters determined from a coarse-fine energy sweep. The first 4 columns provide the time information for the beginning and end of a given sweep. The next 5 columns provide the solar wind proton density, speed, temperature, dynamic pressure and thermal pressure. The remaining columns provide the location of the spacecraft in Heliographic Inertial (HGI), Heliospheric Aries Ecliptic (HAE), and Heliographic (HG), calculated at the mid-point of the associated start and stop UTCs (in fields 1 and 2). These are standard Sun centered coordinate systems. " OBJECT = HEADER HEADER_TYPE = "SPREADSHEET" BYTES = 316 END_OBJECT = HEADER OBJECT = SPREADSHEET ROWS = 124 ROW_BYTES = 266 FIELDS = 25 FIELD_DELIMITER = "COMMA" OBJECT = FIELD NAME = "ST_UTC" FIELD_NUMBER = 1 BYTES = 26 DATA_TYPE = "TIME" FORMAT = "A26" DESCRIPTION = "This field provides the start UTC time of the coarse-fine energy sweep used to determine the solar wind parameters. " END_OBJECT = FIELD OBJECT = FIELD NAME = "SP_UTC" FIELD_NUMBER = 2 BYTES = 26 DATA_TYPE = "TIME" FORMAT = "A26" DESCRIPTION = "This field provides the stop UTC time of the coarse-fine energy sweep used to determine the solar wind parameters. " END_OBJECT = FIELD OBJECT = FIELD NAME = "ST_MET" FIELD_NUMBER = 3 BYTES = 13 DATA_TYPE = "ASCII_REAL" FORMAT = "F13.3" UNIT = "S" DESCRIPTION = "This field provides the start MET time of the coarse-fine energy sweep used to determine the solar wind parameters. " END_OBJECT = FIELD OBJECT = FIELD NAME = "SP_MET" FIELD_NUMBER = 4 BYTES = 13 DATA_TYPE = "ASCII_REAL" FORMAT = "F13.3" UNIT = "S" DESCRIPTION = "This field provides the stop MET time of the coarse-fine energy sweep used to determine the solar wind parameters. " END_OBJECT = FIELD OBJECT = FIELD NAME = "N" FIELD_NUMBER = 5 BYTES = 6 DATA_TYPE = "ASCII_REAL" FORMAT = "F6.4" UNIT = "CM**-3" DESCRIPTION = "This field provides solar wind proton density in units of cm^-3. " END_OBJECT = FIELD OBJECT = FIELD NAME = "V" FIELD_NUMBER = 6 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.3" UNIT = "KM/S" DESCRIPTION = "This field provides the solar wind proton speed in units of km/s. " END_OBJECT = FIELD OBJECT = FIELD NAME = "T" FIELD_NUMBER = 7 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "E10.3" UNIT = "K" DESCRIPTION = "This field provides the solar wind proton temperature in units of K. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PDYN" FIELD_NUMBER = 8 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.5" UNIT = "nPa" DESCRIPTION = "This field provides the solar wind proton dynamic pressure in units of nPa. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PTH" FIELD_NUMBER = 9 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.5" UNIT = "pPa" DESCRIPTION = "This field provides the solar wind thermal pressure in units of pPa. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HGI_D_X" FIELD_NUMBER = 10 BYTES = 9 DATA_TYPE = "ASCII_REAL" FORMAT = "F9.5" UNIT = "AU" DESCRIPTION = "This field provides the x component of the center of the spacecraft position in HGI coordinates in units of AU. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HGI_D_Y" FIELD_NUMBER = 11 BYTES = 9 DATA_TYPE = "ASCII_REAL" FORMAT = "F9.5" UNIT = "AU" DESCRIPTION = "This field provides the y component of the center of the NH spacecraft position in HGI coordinates in units of AU. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HGI_D_Z " FIELD_NUMBER = 12 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.5" UNIT = "AU" DESCRIPTION = "This field provides the z component of the center of the spacecraft position in HGI coordinates in units of AU. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HGI_D_LAT" FIELD_NUMBER = 13 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.5" UNIT = "DEGREE" DESCRIPTION = "This field provides the latitude of the center of the NH spacecraft position in HGI coordinates in degrees. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HGI_D_LON" FIELD_NUMBER = 14 BYTES = 9 DATA_TYPE = "ASCII_REAL" FORMAT = "F9.5" UNIT = "DEGREE" DESCRIPTION = "This field provides the longitude of the center of the NH spacecraft position in HGI coordinates in degrees. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HGI_D_R" FIELD_NUMBER = 15 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.5" UNIT = "AU" DESCRIPTION = "This field provides the distance to the center of the NH spacecraft position from the center of the HGI coordinate system (Sun) in units of AU. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HAE_J2000_D_X " FIELD_NUMBER = 16 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.5" UNIT = "AU" DESCRIPTION = "This field provides the x component of the center of the spacecraft position in HAE coordinates in units of AU. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HAE_J2000_D_Y" FIELD_NUMBER = 17 BYTES = 9 DATA_TYPE = "ASCII_REAL" FORMAT = "F9.5" UNIT = "AU" DESCRIPTION = "This field provides the y component of the center of the spacecraft position in HAE coordinates in units of AU. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HAE_J2000_D_Z" FIELD_NUMBER = 18 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.5" UNIT = "AU" DESCRIPTION = "This field provides the z component of the center of the spacecraft position in HAE coordinates in units of AU. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HAE_J2000_D_LAT" FIELD_NUMBER = 19 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.5" UNIT = "DEGREE" DESCRIPTION = "This field provides the latitude of the center of the spacecraft position in HAE coordinates in units of degrees. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HAE_J2000_D_LON" FIELD_NUMBER = 20 BYTES = 9 DATA_TYPE = "ASCII_REAL" FORMAT = "F9.5" UNIT = "DEGREE" DESCRIPTION = "This field provides the longitude of the center of the spacecraft position in HAE coordinates in units of degrees. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HG_D_X" FIELD_NUMBER = 21 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.5" UNIT = "AU" DESCRIPTION = "This field provides the x component of the center of the spacecraft position in HG coordinates in units of AU. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HG_D_Y" FIELD_NUMBER = 22 BYTES = 8 DATA_TYPE = "ASCII_REAL" FORMAT = "F8.5" UNIT = "AU" DESCRIPTION = "This field provides the y component of the center of the spacecraft position in HG coordinates in units of AU. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HG_D_Z" FIELD_NUMBER = 23 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.5" UNIT = "AU" DESCRIPTION = "This field provides the z component of the center of the spacecraft position in HG coordinates in units of AU. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HG_D_LAT" FIELD_NUMBER = 24 BYTES = 7 DATA_TYPE = "ASCII_REAL" FORMAT = "F7.5" UNIT = "DEGREE" DESCRIPTION = "This field provides the latitude of the center of the spacecraft position in HG coordinates in units of degrees. " END_OBJECT = FIELD OBJECT = FIELD NAME = "NH_HG_D_LON" FIELD_NUMBER = 25 BYTES = 9 DATA_TYPE = "ASCII_REAL" FORMAT = "F9.5" UNIT = "DEGREE" DESCRIPTION = "This field provides the longitude of the center of the spacecraft position in HG coordinates in units of degrees. " END_OBJECT = FIELD END_OBJECT = SPREADSHEET END