PDS_VERSION_ID = PDS3 RECORD_TYPE = "STREAM" RECORD_BYTES = 382 FILE_RECORDS = 402 ^HEADER = ( "NH_HGA_PATTERN_WIDE_ANGLE.CSV", 1 ) ^SPREADSHEET = ( "NH_HGA_PATTERN_WIDE_ANGLE.CSV", 111 ) DATA_SET_ID = { "NH-X-REX-2-LAUNCH-V1.0" , "NH-X-REX-3-LAUNCH-V1.0" , "NH-J-REX-2-JUPITER-V1.0" , "NH-J-REX-3-JUPITER-V1.0" , "NH-X-REX-2-PLUTOCRUISE-V1.0" , "NH-X-REX-3-PLUTOCRUISE-V1.0" , "NH-P-REX-2-PLUTO-V1.0" , "NH-P-REX-3-PLUTO-V1.0" } MISSION_NAME = "NEW HORIZONS KUIPER BELT EXTENDED MISSION" INSTRUMENT_HOST_NAME = "NEW HORIZONS" INSTRUMENT_NAME = "RADIO SCIENCE EXPERIMENT" INSTRUMENT_ID = "REX" PRODUCT_CREATION_TIME = 2015-12-31T00:00:00 PRODUCT_ID = "NH_HGA_PATTERN_WIDE_ANGLE" DESCRIPTION = " This document records beam pattern response of the New Horizons (NH) High Gain Antenna (HGA) as measured on the ground. The details of the test setup are in the document labeled with DOCUMENT/NH_HGA_TESTREPORT_FINALR1.LBL in this data set. There are two parameters: Theta (elevation, rows); Phi (Azimuth, columns). The data are in per-column normalized dB, that is, each column has at least one value that is zero, and zero is the maximum value in the table. " /* ***************** Header Description ******************************** */ OBJECT = HEADER BYTES = 110 RECORDS = 1 HEADER_TYPE = "TEXT" DESCRIPTION = "This header contain twenty-five column-separated values (CSVs) providing headers for the columns in the SPREADSHEET that follows this header. The first CSV identifies the first column in the SPREADSHEET as the Theta (elevation) header for the SPREADSHEET rows, and this header row as the Phi (azimuth) header for the SPREADSHEET columns. The remaining twenty-four CSVs in this header are the Phi values, zero through three-hundred forty-five degrees, in increments of fifteen degrees. " END_OBJECT = HEADER /* ******************** Data Description ******************************* */ OBJECT = SPREADSHEET NAME = "NH HGA BEAM PATTERN WIDE ANGLE GROUND DATA" FIELD_DELIMITER = "COMMA" FIELDS = 25 ROW_BYTES = 382 ROWS = 401 DESCRIPTION = "This is a SPREADSHEET object composing a table of New Horizons (NH) spacecraft, High Gain Antenna (HGA) beam pattern response data. The first column is a header column, specifying the Theta (elevation) angle in each row. The remaining 24 columns contain the per-column normalized responses as measured in the test setup. The second column represents data taken at a Phi (azimuth) of 0 degrees; the succeeding columns represents azimuth in increments of 15 degrees; i.e. the third column azimuth is 15 degrees, the fourth 30, etc., through the twenty-fifth column representing an azimuth of 345 degrees. The data were taken pre-flight, using the test setup described in the document labeled with DOCUMENT/NH_HGA_TESTREPORT_FINALR1.LBL in this data set; elevation and azimuth are defined there. " OBJECT = FIELD NAME = "HEADER COLUMN PHI" FIELD_NUMBER = 1 BYTES = 20 DATA_TYPE = CHARACTER UNIT = "DEGREE" DESCRIPTION = "The Theta (elevation) setting of values on the row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 000 COLUMN" FIELD_NUMBER = 2 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 015 COLUMN" FIELD_NUMBER = 3 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 030 COLUMN" FIELD_NUMBER = 4 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 045 COLUMN" FIELD_NUMBER = 5 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 060 COLUMN" FIELD_NUMBER = 6 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 075 COLUMN" FIELD_NUMBER = 7 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 090 COLUMN" FIELD_NUMBER = 8 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 105 COLUMN" FIELD_NUMBER = 9 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 120 COLUMN" FIELD_NUMBER = 10 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 135 COLUMN" FIELD_NUMBER = 11 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 150 COLUMN" FIELD_NUMBER = 12 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 165 COLUMN" FIELD_NUMBER = 13 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 180 COLUMN" FIELD_NUMBER = 14 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 195 COLUMN" FIELD_NUMBER = 15 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 210 COLUMN" FIELD_NUMBER = 16 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 225 COLUMN" FIELD_NUMBER = 17 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 240 COLUMN" FIELD_NUMBER = 18 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 255 COLUMN" FIELD_NUMBER = 19 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 270 COLUMN" FIELD_NUMBER = 20 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 285 COLUMN" FIELD_NUMBER = 21 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 300 COLUMN" FIELD_NUMBER = 22 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 315 COLUMN" FIELD_NUMBER = 23 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 330 COLUMN" FIELD_NUMBER = 24 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD OBJECT = FIELD NAME = "PHI 345 COLUMN" FIELD_NUMBER = 25 BYTES = 14 DATA_TYPE = ASCII_REAL UNIT = "dB" DESCRIPTION = "The response of the HGA at the Phi (aziumth) angle specified in degrees in the header row. " END_OBJECT = FIELD END_OBJECT = SPREADSHEET END