2014.11.12 07:26:30 MUPUS Enable G-Bus success
2014.11.12 07:26:45 MUPUS NoMode success 
2014.11.12 07:28:01 MUPUS Config heater data output success 
2014.11.12 07:29:02 MUPUS Config switch-on temperature success 
2014.11.12 07:31:00 MUPUS time-stamped Anchor mode success 
2014.11.12 07:33:01 MUPUS time-stamped Anchor mode success 
2014.11.12 07:34:01 MUPUS dump RAM address x4B66 success 
2014.11.12 07:35:01 MUPUS start MAPPER mode success 
2014.11.12 07:40:31 MUPUS Enable G-Bus success 
2014.11.12 07:42:01 MUPUS time-stamped Anchor mode success 
2014.11.12 07:42:30 MUPUS start MAPPER mode success 
2014.11.12 08:39:02 MUPUS Enable G-Bus success 
2014.11.12 12:57:36 MUPUS switch TM blackbody ON success 
2014.11.12 13:17:36 MUPUS switch TM blackbody OFF success 
2014.11.12 13:22:37 MUPUS start MAPPER mode success 
2014.11.12 14:45:44 MUPUS Enable G-Bus success 
2014.11.12 14:47:44 MUPUS time-stamped Anchor mode success 
2014.11.12 14:48:43 MUPUS start ANCHOR mode success 
2014.11.12 14:49:13 MUPUS queue MAPPER mode success 
2014.11.12 15:37:23 MUPUS Enable G-Bus success 
2014.11.12 15:38:23 MUPUS start MAPPER mode success 
2014.11.12 15:54:08 MUPUS read Landing Gear BRAM success 
2014.11.12 16:04:09 MUPUS Transfer ANC-1 data success 
2014.11.12 16:14:50 MUPUS Transfer ANC-2 data success 
2014.11.12 16:33:50 MUPUS start MAPPER mode success 
2014.11.13 01:32:01 MUPUS Enable G-Bus success 
2014.11.13 01:32:31 MUPUS Config switch-on temperature success 
2014.11.13 01:33:01 MUPUS start MAPPER mode success 
2014.11.13 06:32:27 MUPUS Enable G-Bus success 
2014.11.13 06:32:47 MUPUS Config heater data output success 
2014.11.13 06:33:07 MUPUS Config infinite TEM submode success 
2014.11.13 06:33:27 MUPUS start default LONGTERM (-> MAPPER) mode success 
2014.11.13 08:34:27 MUPUS Enable G-Bus success 
2014.11.13 08:34:47 MUPUS Config heater data output success 
2014.11.13 08:35:06 MUPUS Config infinite TEM submode success 
2014.11.13 08:35:26 MUPUS start default LONGTERM (-> MAPPER) mode success 
2014.11.13 10:36:30 MUPUS Enable G-Bus success 
2014.11.13 10:36:50 MUPUS Config heater data output success 
2014.11.13 10:37:10 MUPUS Config infinite TEM submode success 
2014.11.13 10:37:31 MUPUS start default LONGTERM (-> MAPPER) mode success 
2014.11.13 12:38:30 MUPUS Enable G-Bus success 
2014.11.13 12:38:50 MUPUS Config heater data output success 
2014.11.13 12:39:09 MUPUS Config infinite TEM submode success 
2014.11.13 12:39:29 MUPUS start default LONGTERM (-> MAPPER) mode success 
2014.11.13 21:50:56 MUPUS Enable G-Bus success 
2014.11.13 21:51:11 MUPUS NoMode success 
2014.11.13 21:51:25 MUPUS Config PENEL operational temperature success 
2014.11.13 21:52:29 MUPUS Config heater data output success 
2014.11.13 21:53:25 MUPUS Config deployment length 585 mm success 
2014.11.13 21:53:56 MUPUS Config deployment mode success 
2014.11.13 21:54:25 MUPUS Config minimum Landing Gear height success 
2014.11.13 21:55:25 MUPUS Config insertion parameters success 
2014.11.13 21:55:56 MUPUS Config deployment speed success 
2014.11.13 21:56:25 MUPUS Dump config success 
2014.11.13 21:56:56 MUPUS save config success 
2014.11.13 22:00:56 MUPUS start TEM mode success 
2014.11.13 22:41:25 MUPUS dump Landing Gear BRAM success 
2014.11.13 23:30:58 MUPUS start GEAR mode success 
2014.11.13 23:31:58 MUPUS queue TEM mode success 
2014.11.13 23:47:02 MUPUS Config PENEL operational temperature (default) success
2014.11.14 00:12:34 MUPUS Enable G-Bus success 
2014.11.14 00:20:44 MUPUS start default HAMMER mode success 
2014.11.14 00:21:44 MUPUS queue TEM mode success 
2014.11.14 01:47:04 MUPUS disable release of DS success 
2014.11.14 01:47:35 MUPUS perform 5 DD motor rotations success 
2014.11.14 01:48:05 MUPUS switch OFF DSB-2 success 
2014.11.14 01:48:35 MUPUS start TEM mode success