/* PP PM2 parameter settings, version 2, 2015-11-11 */
OBJECT = COLUMN
NAME = "SESAME_SEQ_ID"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 1
BYTES = 6
UNIT = "N/A"
FORMAT = "I6"
DESCRIPTION = "Sequence ID in the current data file"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "UTC"
DATA_TYPE = TIME
START_BYTE = 8
BYTES = 23
DESCRIPTION = "Measurement start time (UTC in PDS standard
format YYYY-MM-DDThh:mm:ss.sss)"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "SESAME_LOCAL_TIME"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 32
BYTES = 15
FORMAT = "I15"
DESCRIPTION = "Measurement start time. SESAME local time
(SLT) runs with a resolution of 1/32 seconds.
SLT represents the least significant 32 bits
of LOBT. The most significant 5 bits are in
CDMS RSST (see SESAME Ready Message)"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "LP_INT_CLK_DIV"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 48
BYTES = 2
UNIT = "N/A"
FORMAT = "I2"
DESCRIPTION = "The LP integrator clock divider determines
integrating time of Langmuir Probe (LP)
measurement "
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "LP_VALUE"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 51
BYTES = 5
UNIT = "N/A"
FORMAT = "I5"
DESCRIPTION = "Result count of Langmuir probe measurement "
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "LP_MEAS_ERR"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 57
BYTES = 8
MISSING_CONSTANT = 16#0000#
DESCRIPTION = "Error code for LP measurement.
Hex value as 16#xxxx#. The possible values are:
8001 Invalid register address.
8002 Error verifying register write.
8004 Error accessing power register.
8008 MUX setting not allowed.
8010 Error accessing PP RAM.
8020 Tried to start measurement but a measurement
is already running.
0040 Error during writing to instrument.
0080 Error during reading from instrument.
0100 Error using ADC of C-DPU.
0200 Error during DAC table generation.
0400 Calculated number of samples > N_SAMP_MAX.
8800 C-DPU memory exhausted.
9000 Measurement time out.
2000 Invalid command parameter.
8000 Flag indicates fatal error. "
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "ADC_CLK_DIV"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 66
BYTES = 5
UNIT = "N/A"
FORMAT = "I5"
DESCRIPTION = "ADC clock divider used when generating the
receiver sampling frequency: 5 MHz / this
parameter "
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "NB_SAMPLES"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 72
BYTES = 5
UNIT = "N/A"
FORMAT = "I5"
DESCRIPTION = "Number of used samples (excluding skipped samples) "
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "ERROR_CODE"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 78
BYTES = 8
UNIT = "N/A"
MISSING_CONSTANT = 16#0000#
DESCRIPTION = "Hex value as 16#xxxx#. The possible values are:
8001 Invalid register address.
8002 Error verifying register write.
8004 Error accessing power register.
8008 MUX setting not allowed.
8010 Error accessing PP RAM.
8020 Tried to start measurement but a measurement
is already running.
0040 Error during writing to instrument.
0080 Error during reading from instrument.
0100 Error using ADC of C-DPU.
0200 Error during DAC table generation.
0400 Calculated number of samples > N_SAMP_MAX.
8800 C-DPU memory exhausted.
9000 Measurement time out.
2000 Invalid command parameter.
8000 Flag indicates fatal error. "
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "NB_FREQ_BINS"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 87
BYTES = 2
UNIT = "N/A"
FORMAT = "I2"
DESCRIPTION = "Number of frequency bins "
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "MATH_ERR_CODE"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 90
BYTES = 8
UNIT = "N/A"
MISSING_CONSTANT = 16#0000#
DESCRIPTION = "Indicates errors, which can only occur during
on-board data reduction (hex value as 16#xxxx#).
0001 Reduce: number of vector elements odd or less
than 2; fatal.
0002 Expand: less than four elements in input
vector; fatal.
0004 Too much data for analysis; truncating.
0008 Too few data for analysis; padding with 128
0010 Used number of waves is not a power of 2;
truncated.
0020 Not the expected number of elements in
filtered arrays; fatal.
0040 Argument for sine_table() not in valid range
0<= deg2 <=720.
0080 Overflow in divsin() or result inexact.
0100 Too few data for trimmed mean calculation;
regular mean used.
0200 No data for warr.mean; particular: analysis
yields no data.
0400 Passive mode: not enough data in bin.
0800 Not enough memory for data reduction."
END_OBJECT = COLUMN