/* FILE_CONTENTS = SESAME Health Check */
/* Flight software FM3, CODMAC level 3 */
/* FILE_NAME = SESAME_HC_FM3.FMT */
/* REVISION_NOTE = SESAME/DIM team, version 1, 2015-11-04 */
/* K. Seidensticker, version 2, 2015-11-04 */
/* W. Schmidt, version 4, 2015-11-11 */
OBJECT = COLUMN
NAME = "UTC"
DATA_TYPE = TIME
START_BYTE = 1
BYTES = 23
DESCRIPTION = "Measurement start time (UTC in PDS standard
format YYYY-MM-DDThh:mm:ss.sss)"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "SESAME_LOCAL_TIME"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 25
BYTES = 15
FORMAT = "I15"
DESCRIPTION = "Measurement start time. SESAME local time
(SLT) runs with a resolution of 1/32 seconds.
SLT represents the least significant 32 bits
of LOBT. The most significant 5 bits are in
CDMS RSST (see SESAME Ready Message)"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "U+05"
DATA_TYPE = ASCII_REAL
START_BYTE = 41
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics +5V voltage"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "U-05"
DATA_TYPE = ASCII_REAL
START_BYTE = 50
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics -5V voltage"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "U+12"
DATA_TYPE = ASCII_REAL
START_BYTE = 59
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics +12V voltage"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "U-12"
DATA_TYPE = ASCII_REAL
START_BYTE = 68
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics -12V voltage"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "U+28"
DATA_TYPE = ASCII_REAL
START_BYTE = 77
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics +28V voltage"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "UCDP"
DATA_TYPE = ASCII_REAL
START_BYTE = 86
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics
Common DPU +5V voltage"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "I+05"
DATA_TYPE = ASCII_REAL
START_BYTE = 95
BYTES = 8
FORMAT = "F8.3"
UNIT = "MILLIAMPERE"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics +5V current"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "I-05"
DATA_TYPE = ASCII_REAL
START_BYTE = 104
BYTES = 8
FORMAT = "F8.3"
UNIT = "MILLIAMPERE"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics -5V current"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "I+12"
DATA_TYPE = ASCII_REAL
START_BYTE = 113
BYTES = 8
FORMAT = "F8.3"
UNIT = "MILLIAMPERE"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics +12V current"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "I-12"
DATA_TYPE = ASCII_REAL
START_BYTE = 122
BYTES = 8
FORMAT = "F8.3"
UNIT = "MILLIAMPERE"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics -12V current"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "I+28"
DATA_TYPE = ASCII_REAL
START_BYTE = 131
BYTES = 8
FORMAT = "F8.3"
UNIT = "MILLIAMPERE"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Common electronics +28V current"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "SUPS"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 140
BYTES = 8
UNIT = "N/A"
MISSING_CONSTANT = 16#FFFF#
DESCRIPTION = "Common electronics; SRAM usage/
power status (hex value as 16#xxxx#)"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "TIBO"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 149
BYTES = 6
FORMAT = "I6"
UNIT = "SECOND"
MISSING_CONSTANT = 999999
DESCRIPTION = "Common electronics
Time since boot"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "ERRF"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 156
BYTES = 8
UNIT = "N/A"
MISSING_CONSTANT = 16#FFFF#
DESCRIPTION = "Common electronics
Error flags (hex value as 16#xxxx#)"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "CEID"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 165
BYTES = 8
UNIT = "N/A"
MISSING_CONSTANT = 16#FFFF#
DESCRIPTION = "Common electronics; SESAME flight
software ID (hex value, FM3: 16#C5E5#)"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "CLTC"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 174
BYTES = 8
UNIT = "N/A"
MISSING_CONSTANT = 16#FFFF#
DESCRIPTION = "Common electronics; Last received TC
(hex value as 16#xxxx#)"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "CBTC"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 183
BYTES = 8
UNIT = "N/A"
MISSING_CONSTANT = 16#FFFF#
DESCRIPTION = "Common electronics; Last but one TC
(hex value as 16#xxxx#)"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "TT-Y"
DATA_TYPE = ASCII_REAL
START_BYTE = 192
BYTES = 8
FORMAT = "F8.3"
UNIT = "KELVIN"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "CASSE
Foot -Y/TRM temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "TA-Y"
DATA_TYPE = ASCII_REAL
START_BYTE = 201
BYTES = 8
FORMAT = "F8.3"
UNIT = "KELVIN"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "CASSE
Foot -Y/ACC temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "TT+X"
DATA_TYPE = ASCII_REAL
START_BYTE = 210
BYTES = 8
FORMAT = "F8.3"
UNIT = "KELVIN"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "CASSE
Foot +X/TRM temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "TA+X"
DATA_TYPE = ASCII_REAL
START_BYTE = 219
BYTES = 8
FORMAT = "F8.3"
UNIT = "KELVIN"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "CASSE
Foot +X/ACC temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "TT+Y"
DATA_TYPE = ASCII_REAL
START_BYTE = 228
BYTES = 8
FORMAT = "F8.3"
UNIT = "KELVIN"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "CASSE
Foot +Y/TRM temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "TA+Y"
DATA_TYPE = ASCII_REAL
START_BYTE = 237
BYTES = 8
FORMAT = "F8.3"
UNIT = "KELVIN"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "CASSE
Foot +Y/ACC temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "TPCB"
DATA_TYPE = ASCII_REAL
START_BYTE = 246
BYTES = 8
FORMAT = "F8.3"
UNIT = "KELVIN"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "CASSE board temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "UFPG"
DATA_TYPE = ASCII_REAL
START_BYTE = 255
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "CASSE FPGA 3.3V voltage"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "URAD"
DATA_TYPE = ASCII_REAL
START_BYTE = 264
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "CASSE total dose (RadFET)"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "UD+5"
DATA_TYPE = ASCII_REAL
START_BYTE = 273
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "DIM +5V voltage"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "UD-5"
DATA_TYPE = ASCII_REAL
START_BYTE = 282
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "DIM -5V voltage"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "UP+5"
DATA_TYPE = ASCII_REAL
START_BYTE = 291
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "PP +5V voltage"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "PPD"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 300
BYTES = 5
FORMAT = "I5"
UNIT = "N/A"
MISSING_CONSTANT = 99999
DESCRIPTION = "PP electron density"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "LMID"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 306
BYTES = 5
FORMAT = "I5"
MISSING_CONSTANT = 99999
DESCRIPTION = "Common electronics
SLT mid word"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "LLOW"
DATA_TYPE = ASCII_INTEGER
START_BYTE = 312
BYTES = 5
FORMAT = "I5"
MISSING_CONSTANT = 99999
DESCRIPTION = "Common electronics
SLT low word"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-HK_CHANNEL1"
DATA_TYPE = ASCII_REAL
START_BYTE = 318
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of temperature channel using
regular HK measurement, for Foot -Y/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I1_CHANNEL1"
DATA_TYPE = ASCII_REAL
START_BYTE = 327
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 1, for Foot -Y/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R1_CHANNEL1"
DATA_TYPE = ASCII_REAL
START_BYTE = 336
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 1 = UCDP,
for Foot -Y/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I2_CHANNEL1"
DATA_TYPE = ASCII_REAL
START_BYTE = 345
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 2, for Foot -Y/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R2_CHANNEL1"
DATA_TYPE = ASCII_REAL
START_BYTE = 354
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 2 = U + 28,
for Foot -Y/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-HK_CHANNEL2"
DATA_TYPE = ASCII_REAL
START_BYTE = 363
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of temperature channel using
regular HK measurement, for Foot -Y/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I1_CHANNEL2"
DATA_TYPE = ASCII_REAL
START_BYTE = 372
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 1, for Foot -Y/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R1_CHANNEL2"
DATA_TYPE = ASCII_REAL
START_BYTE = 381
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.99
DESCRIPTION = "voltage of reference channel 1 = UCDP,
for Foot -Y/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I2_CHANNEL2"
DATA_TYPE = ASCII_REAL
START_BYTE = 390
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 2, for Foot -Y/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R2_CHANNEL2"
DATA_TYPE = ASCII_REAL
START_BYTE = 399
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 2 = U + 28,
for Foot -Y/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-HK_CHANNEL3"
DATA_TYPE = ASCII_REAL
START_BYTE = 408
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of temperature channel using
regular HK measurement, for Foot +X/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I1_CHANNEL3"
DATA_TYPE = ASCII_REAL
START_BYTE = 417
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
from temperature channel to reference
channel 1, for Foot +X/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R1_CHANNEL3"
DATA_TYPE = ASCII_REAL
START_BYTE = 426
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 1 = UCDP,
for Foot +X/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I2_CHANNEL3"
DATA_TYPE = ASCII_REAL
START_BYTE = 435
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 2, for Foot +X/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R2_CHANNEL3"
DATA_TYPE = ASCII_REAL
START_BYTE = 444
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 2 = U + 28,
for Foot +X/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-HK_CHANNEL4"
DATA_TYPE = ASCII_REAL
START_BYTE = 453
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of temperature channel using
regular HK measurement, for Foot +X/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I1_CHANNEL4"
DATA_TYPE = ASCII_REAL
START_BYTE = 462
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 1, for Foot +X/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R1_CHANNEL4"
DATA_TYPE = ASCII_REAL
START_BYTE = 471
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 1 = UCDP,
for Foot +X/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I2_CHANNEL4"
DATA_TYPE = ASCII_REAL
START_BYTE = 480
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 2, for Foot +X/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R2_CHANNEL4"
DATA_TYPE = ASCII_REAL
START_BYTE = 489
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 2 = U + 28,
for Foot +X/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-HK_CHANNEL5"
DATA_TYPE = ASCII_REAL
START_BYTE = 498
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of temperature channel using
regular HK measurement, for Foot +Y/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I1_CHANNEL5"
DATA_TYPE = ASCII_REAL
START_BYTE = 507
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 1, for Foot +Y/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R1_CHANNEL5"
DATA_TYPE = ASCII_REAL
START_BYTE = 516
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 1 = UCDP,
for Foot +Y/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I2_CHANNEL5"
DATA_TYPE = ASCII_REAL
START_BYTE = 525
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 2, for Foot +Y/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R2_CHANNEL5"
DATA_TYPE = ASCII_REAL
START_BYTE = 534
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 2 = U + 28,
for Foot +Y/TRM"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-HK_CHANNEL6"
DATA_TYPE = ASCII_REAL
START_BYTE = 543
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of temperature channel using
regular HK measurement, for Foot +Y/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I1_CHANNEL6"
DATA_TYPE = ASCII_REAL
START_BYTE = 552
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 1, for Foot +Y/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R1_CHANNEL6"
DATA_TYPE = ASCII_REAL
START_BYTE = 561
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 1 = UCDP,
for Foot +Y/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I2_CHANNEL6"
DATA_TYPE = ASCII_REAL
START_BYTE = 570
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 2, for Foot +Y/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R2_CHANNEL6"
DATA_TYPE = ASCII_REAL
START_BYTE = 579
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 2 = U + 28,
for Foot +Y/ACC"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-HK_CHANNEL7"
DATA_TYPE = ASCII_REAL
START_BYTE = 588
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of temperature channel using
regular HK measurement, for CASSE PCB
temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I1_CHANNEL7"
DATA_TYPE = ASCII_REAL
START_BYTE = 597
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 1, for CASSE PCB temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R1_CHANNEL7"
DATA_TYPE = ASCII_REAL
START_BYTE = 606
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 1 = UCDP,
for CASSE PCB temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-I2_CHANNEL7"
DATA_TYPE = ASCII_REAL
START_BYTE = 615
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Intermediate voltage measured shortly after
switching from temperature channel to reference
channel 2, for CASSE PCB temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "T-R2_CHANNEL7"
DATA_TYPE = ASCII_REAL
START_BYTE = 624
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "Voltage of reference channel 2 = U + 28,
for CASSE PCB temperature"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = "URAD-2"
DATA_TYPE = ASCII_REAL
START_BYTE = 633
BYTES = 8
FORMAT = "F8.3"
UNIT = "VOLT"
MISSING_CONSTANT = 9999.999
DESCRIPTION = "CASSE total dose (RadFET),
second measurement"
END_OBJECT = COLUMN