/* FILE_CONTENTS           = DIM Burst Continuous Test Mode 2 SIG data */
/*                           Flight software FM3, CODMAC level 2 */
/* FILE_NAME               = DIM_BCTEST2_SIG_FM3.FMT */
/* REVISION_NOTE           = A. Hirn, H. Krueger, version 1, 2015-11-17 */
/*                           A. Hirn, version 2, 2015-11-20 */

OBJECT                     = COLUMN
    NAME                   = "SESAME_SEQ_ID"
    DATA_TYPE              = ASCII_INTEGER
    START_BYTE             = 1
    BYTES                  = 6
    FORMAT                 = "I6"
    UNIT                   = "N/A"
    MISSING_CONSTANT       = 999999
    DESCRIPTION            = "Sequence ID in the current data file"
END_OBJECT                 = COLUMN

OBJECT                     = COLUMN
    NAME                   = "EVENT_TIME"
    DATA_TYPE              = ASCII_INTEGER
    START_BYTE             = 8
    BYTES                  = 15
    FORMAT                 = "I15"
    DESCRIPTION            = "Event time. SESAME local time
                              (SLT) runs with a resolution of 1/32 seconds.
                              SLT represents the least significant 32 bits
                              of LOBT. The most significant 5 bits are in
                              CDMS RSST (see SESAME Ready Message)"
END_OBJECT                 = COLUMN

OBJECT                     = COLUMN
    NAME                   = "COUNTS"
    DATA_TYPE              = ASCII_INTEGER
    START_BYTE             = 24
    BYTES                  = 6
    FORMAT                 = "I6"
    UNIT                   = "N/A"
    MISSING_CONSTANT       = 999999
    DESCRIPTION            = "DIM calibration timer counts"
END_OBJECT                 = COLUMN

OBJECT                     = COLUMN
    NAME                   = "PEAK_MV"
    DATA_TYPE              = ASCII_INTEGER
    START_BYTE             = 31
    BYTES                  = 4
    UNIT                   = "MILLIVOLT"
    FORMAT                 = "I4"
    MISSING_CONSTANT       = 9999
    DESCRIPTION            = "Peak voltage in mV"
END_OBJECT                 = COLUMN

OBJECT                     = COLUMN
    NAME                   = "TIME_DB"
    DATA_TYPE              = ASCII_INTEGER
    START_BYTE             = 36
    BYTES                  = 2
    UNIT                   = "DECIBEL"
    FORMAT                 = "I2"
    MISSING_CONSTANT       = 99
    DESCRIPTION            = "Timer counts in compressed format"
END_OBJECT                 = COLUMN

OBJECT                     = COLUMN
    NAME                   = "PEAK_DB"
    DATA_TYPE              = ASCII_INTEGER
    START_BYTE             = 39
    BYTES                  = 2
    UNIT                   = "DECIBEL"
    FORMAT                 = "I2"
    MISSING_CONSTANT       = 99
    DESCRIPTION            = "Peak voltage in dB"
END_OBJECT                 = COLUMN