/*              Contents of format file  "ROMAP_SPM_RAW_ION.FMT"         */
/*                Ion spectrum definition      (Level 2)                 */
/*       (I1CNT or I2CNT),   raw mode (channels 1 or 2)                  */

/* ************************************************************ */
/* Include the HEADER at the beginning of each measurement       */
/* ************************************************************ */

OBJECT                = COLUMN
    NAME              = "UTC"
    DATA_TYPE         = TIME
    START_BYTE        = 1
    BYTES             = 23
    DESCRIPTION       = "This column represents the UTC
                         Of the SPM spectrum in PDS standard format
                         YYYY-MM-DDThh:mm:ss.sss"
 END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "OBT"
    DATA_TYPE        = ASCII_REAL
    START_BYTE       = 25
    BYTES            = 15
    UNIT             = SECOND
    FORMAT           = "F15.5"
    DESCRIPTION      = "ROMAP 4 bytes counter representing the measurement
                        time synchronized with Lander On Board Time.
                        The time resolution is 0.03125 s"
END_OBJECT         = COLUMN

OBJECT               = COLUMN
    NAME             = "MODE"
    DATA_TYPE        = CHARACTER
    START_BYTE       = 42
    BYTES            = 9
    FORMAT           = "N/A"
    UNIT             = "N/A"
    DESCRIPTION      = "SPM mode:
                        raw or parameter"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "EXPOSITION_TIME"
    DATA_TYPE        = CHARACTER
    START_BYTE       = 54
    BYTES            = 5
    FORMAT           = "N/A"
    UNIT             = "N/A"
    DESCRIPTION      = "SPM exposition time setting:
                        short or long"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "CALIBRATION"
    DATA_TYPE        = CHARACTER
    START_BYTE       = 62
    BYTES            = 8
    FORMAT           = "N/A"
    UNIT             = "N/A"
    DESCRIPTION      = "SPM calibration status:
                        active or inactive"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "CEM_SUPPLY"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 72
    BYTES            = 1
    FORMAT           = "I1"
    UNIT             = "N/A"
    DESCRIPTION      = "SPM CEM supply setting:
                        step number from 1 to 5"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "RESOLUTION"
    DATA_TYPE        = CHARACTER
    START_BYTE       = 75
    BYTES            = 4
    FORMAT           = "N/A"
    UNIT             = "N/A"
    DESCRIPTION      = "SPM resolution setting:
                        low or high"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "ION_CHANNEL"
    DATA_TYPE        = CHARACTER
    START_BYTE       = 82
    BYTES            = 8
    FORMAT           = "N/A"
    UNIT             = "N/A"
    DESCRIPTION      = "Ion channel status:
                        Both_off
                        Ion1
                        Ion2
                        Both_on"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "EVEN_ODD"
    DATA_TYPE        = CHARACTER
    START_BYTE       = 93
    BYTES            = 8
    FORMAT           = "N/A"
    UNIT             = "N/A"
    DESCRIPTION      = "Indicates whether all energies
                      are transmitted (64 for full resolution and
                      32 for low resolution) or even/odd energies
                      alternatively. Takes the values:
                        even_odd or full"
END_OBJECT           = COLUMN

/* ************************************************************ */
/* Add index and type columns                                   */
/*      Index column : measurement number                        */
/*      Type  column : measurement type (I1CNT or I2CNT)         */
/* ************************************************************ */

OBJECT             = COLUMN
    NAME             = "INDEX"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 103
    BYTES            = 5
    FORMAT           = "I5"
    UNIT             = "N/A"
    DESCRIPTION      = "Measurement index"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "TYPE"
    DATA_TYPE        = CHARACTER
    START_BYTE       = 110
    BYTES            = 5
    FORMAT           = "N/A"
    UNIT             = "N/A"
    DESCRIPTION      = "Measurement type (I1CNT or I2CNT)"
END_OBJECT         = COLUMN

/* ********************************************************** */

OBJECT             = COLUMN
    NAME             = "ENERGY_BIN"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 117
    BYTES            = 2
    FORMAT           = "I2"
    UNIT             = "N/A"
    DESCRIPTION      = "Energy bin number"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_1"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 120
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 1 (-52 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_2"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 127
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 2 (-47 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_3"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 134
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 3 (-41 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_4"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 141
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 4 (-34 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_5"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 148
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 5 (-27 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_6"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 155
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 6 (-21 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_7"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 162
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 7 (-16 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_8"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 169
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 8 (-11 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_9"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 176
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 9 (-6 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_10"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 183
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 10 (0 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_11"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 190
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 11 (5 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_12"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 197
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 12 (10 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_13"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 204
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 13 (15 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_14"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 211
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 14 (20 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_15"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 218
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 15 (25 deg)"
END_OBJECT         = COLUMN

OBJECT             = COLUMN
    NAME             = "COUNTS_ELEVATION_16"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 225
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "ADC_UNITS"
    DESCRIPTION      = "Counts for elevation step 16 (31 deg)"
END_OBJECT         = COLUMN