/* PP AMTEST2 parameter settings / calibrated, version 3, 2015-12-16 */

OBJECT               = COLUMN
    NAME             = "SESAME_SEQ_ID"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 1
    BYTES            = 6
    UNIT             = "N/A"
    FORMAT           = "I6"
    DESCRIPTION      = "Sequence ID in the current data file"
END_OBJECT           = COLUMN

OBJECT                 = COLUMN
  NAME                 = "UTC"
  DATA_TYPE            = TIME
  START_BYTE           = 8
  BYTES                = 23
  DESCRIPTION          = "Measurement start time (UTC in PDS standard
                          format YYYY-MM-DDThh:mm:ss.sss)"
END_OBJECT             = COLUMN

OBJECT                 = COLUMN
    NAME               = "SESAME_LOCAL_TIME"
    DATA_TYPE          = ASCII_INTEGER
    START_BYTE         = 32
    BYTES              = 15
    FORMAT             = "I15"
    DESCRIPTION        = "Measurement start time. SESAME local time
                         (SLT) runs with a resolution of 1/32 seconds.
                          SLT represents the least significant 32 bits
                          of LOBT. The most significant 5 bits are in
                          CDMS RSST (see SESAME Ready Message)"
END_OBJECT             = COLUMN

OBJECT                 = COLUMN
    NAME               = "SENSOR_SETTINGS_USED"
    DATA_TYPE          = ASCII_INTEGER
    START_BYTE         = 48
    BYTES              = 7
    UNIT               = "N/A"
    DESCRIPTION        = "Used electrode combination as 3-digit
                           hexadecimal code 16#abi# with the
                           following meaning:
                         a: electrode connected to the TX A output.
                            Possible values: 
                            0 [none], 
                            1 [+X leg], 
                            2 [MUPUS PEN]
                         b: electrode connected to the TX B output.
                            Possible values:
                            0 [none], 
                            2 [MUPUS PEN], 
                            3 [APX]
                         i: input channel
                            Possible values:
                            0 [potential difference]
                            1 [current at +X leg]
                            2 [current at MUPUS PEN]
                            3 [current at APX]
                            4 [direct measurement at +Y foot]
                            5 [direct measurement at - foot]
                            6 [reference voltage -2.5 V]
                            7 [reference voltage +2.5 V] "
END_OBJECT             = COLUMN

OBJECT                 = COLUMN
    NAME               = "NOMINAL_FREQUENCY"
    DATA_TYPE          = ASCII_INTEGER
    START_BYTE         = 56
    BYTES              = 5
    UNIT               = "HZ"
    FORMAT             = "I5"
    DESCRIPTION        = "Nominal transmitter frequency"
END_OBJECT             = COLUMN

OBJECT                 = COLUMN
    NAME               = "CORRECTED_FREQUENCY"
    DATA_TYPE          = ASCII_REAL
    START_BYTE         = 62
    BYTES              = 8
    UNIT               = "HZ"
    FORMAT             = "F8.2"
    DESCRIPTION        = "Corrected transmitter frequency"
END_OBJECT             = COLUMN

OBJECT                 = COLUMN
    NAME               = "NUMBER_OF_WAVES"
    DATA_TYPE          = ASCII_INTEGER
    START_BYTE         = 71
    BYTES              = 2
    UNIT               = "N/A"
    FORMAT             = "I2"
    DESCRIPTION        = "Number of generated transmitter sine waves"
END_OBJECT             = COLUMN

OBJECT                 = COLUMN
    NAME               = "RX_SAMPLING_FREQUENCY"
    DATA_TYPE          = ASCII_REAL
    START_BYTE         = 74
    BYTES              = 8
    UNIT               = "HZ"
    FORMAT             = "F8.1"
    DESCRIPTION        = "Receiver sampling frequency"
END_OBJECT             = COLUMN

OBJECT                 = COLUMN
    NAME               = "RX_SAMPLING_FREQUENCY"
    DATA_TYPE          = ASCII_REAL
    START_BYTE         = 83
    BYTES              = 8
    UNIT               = "HZ"
    FORMAT             = "F8.1"
    DESCRIPTION        = "Transmitter DAC sampling frequency"
END_OBJECT             = COLUMN

OBJECT                 = COLUMN
    NAME               = "NO_OF_DAC_VALUES"
    DATA_TYPE          = ASCII_INTEGER
    START_BYTE         = 92
    BYTES              = 3
    UNIT               = "N/A"
    FORMAT             = "I3"
    DESCRIPTION        = "DAC vector length"
END_OBJECT             = COLUMN

OBJECT                 = COLUMN
    NAME               = "TX_OUT_DAMPING"
    DATA_TYPE          = ASCII_INTEGER
    START_BYTE         = 96
    BYTES              = 1
    UNIT               = "N/A"
    FORMAT             = "I1"
    DESCRIPTION        = "TX Voltage Amplitude Reduction. 
                            The possible values are:
                          0 maximum amplitude.
                          1 half amplitude.
                          2 quarter amplitude.
                          3 1/8 amplitude.
                          4 1/16 amplitude."
END_OBJECT             = COLUMN

OBJECT                 = COLUMN
    NAME               = "POINTS_PER_WAVE"
    DATA_TYPE          = ASCII_INTEGER
    START_BYTE         = 98
    BYTES              = 3
    UNIT               = "N/A"
    FORMAT             = "I3"
    MISSING_CONSTANT   = 999
    DESCRIPTION        = "Number of points per wave used by receiver "
END_OBJECT             = COLUMN