# $Log: OIOR_PI6RSO_D_0011_MR_02____.ITL,v $
#
# Revision 1.3  2008/05/01 lkamp
# Corrected AMRF013A sequence name to Dual Continuum
# Renamed file to OIOR_PI6RSO_D_0011_MR_02____00025.ROS for ORFA delivery.
#
# Revision 1.2  2008/04/21 20:27:11  kwirth
# Checked and modified by K.R. Wirth on 21 Apr 2008.
#
# Revision 1.1  2008/04/21 19:05:15  kwirth
# Preliminary PC8 MR02 OIOR sent by L. Kamp via e-mail on 11 Apr 2008.
#
# Initial Active PC8 OIOR for MR02 - 2008/04/10 - L.Kamp
#
#=======================================================================================#
# Filename:    OIOR_PI6RSO_D_0011_MR_02____vvvvv.ROS
# Type:     Orbiter Instrument Operation Request file
#          
# Description:    Linearity test ops for MR
#
#    
# Author:    L.Kamp
#
#      JPL
#   
# Date:      10 April 2008
#   
#---------------------------------------------------------------------------------------#
#=======================================================================================#

# RSOC change: Negative relative times are not foreseen for this OIOR.
# Moved the first 6 sequences 12 min later.

# RSOC change: Corrected mode DualContinuum instead of DualCntm everywhere.

# RSOC change: For sequence AMRS612A, corrected parameter mnemonic VMRG0018 instead of VMRG0010 everywhere.
# Also added [RAW] after parameter value. This is required, as [ENG] is defined as well.

Version: 00001

Ref_date: 01-Jan-2000 # Irrelevant because will be overridden by top-level ITL, but needed for ORFA.

Start_time:  000_00:00:00

End_time:    000_07:58:00
# RSOC change: Allowed for duration of last sequence (18 sec).
# End_time:    000_07:57:00


#=======================================================================================#
Description: "1.   | startup"
#=======================================================================================#

+000_00:00:00      MIRO   OFF           AMRF001A # Power On MIRO via OBCP

+000_00:02:00      MIRO   Engineering   AMRF001B # MIRO Patch 

+000_00:03:00      MIRO   Engineering   AMRS613A # Software Restart 

#=======================================================================================#
Description: "2.   | Warm up instrument" 
#=======================================================================================#

+000_00:06:00       MIRO  Engineering   AMRF008A # "MIRO USO ON v06"

+000_00:09:00       MIRO  Engineering   AMRF007A # "MIRO Cal Heat On v04"

#=======================================================================================#
Description: "3.   | Go to DualC as soon as possible in order to stabilize."
#=======================================================================================#

+000_00:12:00       MIRO  Engineering   AMRF013A # Dual Continuum

#=======================================================================================#
Description: "4.   | Extended Linearity tests" 
Description: "     | Test 1: See effect of MM VC0 on +5V SBEU." 
#=======================================================================================#

+000_02:00:00       MIRO  DualContinuum  AMRF013A # Dual Continuum

+000_02:05:00       MIRO  DualContinuum  AMRS604A (\ # "SMM LNA Power"
                                            VMRG0010 = 0 [RAW]) # Off

+000_02:06:00       MIRO  DualContinuum  AMRF013A # Dual Continuum

+000_02:11:00       MIRO  DualContinuum  AMRS612A (\ # "Move Mirror v02"
                                            VMRG0018 = 2 [RAW]) # Hot

+000_02:12:00       MIRO  DualContinuum  AMRS612A (\ # "Move Mirror v02"
                                            VMRG0018 = 3 [RAW]) # Cold

+000_02:13:00       MIRO  DualContinuum  AMRS612A (\ # "Move Mirror v02"
                                            VMRG0018 = 1 [RAW]) # Space

+000_02:14:00       MIRO  DualContinuum  AMRF013A # Dual Continuum

+000_02:19:00       MIRO  DualContinuum  AMRS604A (\ # "SMM LNA Power"
                                            VMRG0010 = 1 [RAW]) # On

+000_02:19:30       MIRO  DualContinuum  AMRS603A (\ # "MM LNA Power"
                                            VMRG0009 = 0 [RAW]) # Off

+000_02:20:00       MIRO  DualContinuum  AMRF013A # Dual Continuum

+000_02:25:00       MIRO  DualContinuum  AMRS612A (\ # "Move Mirror v02"
                                            VMRG0018 = 2 [RAW]) # Hot

+000_02:26:00       MIRO  DualContinuum  AMRS612A (\ # "Move Mirror v02"
                                            VMRG0018 = 3 [RAW]) # Cold

+000_02:27:00       MIRO  DualContinuum  AMRS612A (\ # "Move Mirror v02"
                                            VMRG0018 = 1 [RAW]) # Space

+000_02:28:00       MIRO  DualContinuum  AMRF013A # Dual Continuum

+000_02:33:00       MIRO  DualContinuum  AMRS604A (\ # "SMM LNA Power"
                                            VMRG0010 = 0 [RAW]) # Off

+000_02:34:00       MIRO  DualContinuum  AMRF013A # Dual Continuum

+000_02:39:00       MIRO  DualContinuum  AMRS612A (\ # "Move Mirror v02"
                                            VMRG0018 = 2 [RAW]) # Hot

+000_02:40:00       MIRO  DualContinuum  AMRS612A (\ # "Move Mirror v02"
                                            VMRG0018 = 3 [RAW]) # Cold

+000_02:41:00       MIRO  DualContinuum  AMRS612A (\ # "Move Mirror v02"
                                            VMRG0018 = 1 [RAW]) # Space

+000_02:42:00       MIRO  DualContinuum  AMRF013A # Dual Continuum

+000_02:47:00       MIRO  DualContinuum  AMRS604A (\ # "SMM LNA Power"
                                            VMRG0010 = 1 [RAW]) # On

+000_02:47:30       MIRO  DualContinuum  AMRS603A (\ # "MM LNA Power"
                                            VMRG0009 = 1 [RAW]) # On

#=======================================================================================#
Description: "     | Test 2: Test effect of MM on CTS data." 
Description: "     | Stay in CTS/SMM mode for 4 hours in order to stabilize CTS."
#=======================================================================================#

+000_02:48:00       MIRO  DualContinuum  AMRF009A # MIRO CTS Warm-up

+000_02:58:00       MIRO  DualContinuum  AMRF012A # CTS/SMM

#=======================================================================================#
Description: "     | Test 3: Test effect of HK data acquisition on CTS spectra."
Description: "     | Stay in CTS/SMM mode for 1 hr with HK off, then for 5' with HK on."
#=======================================================================================#

+000_06:48:00       MIRO  CTS_SMMCntm  AMRS302A # Disable HK

+000_07:48:00       MIRO  CTS_SMMCntm  AMRS301A # Enable HK


#=======================================================================================#
Description: "4.   | Power off" 
#=======================================================================================#

+000_07:53:00       MIRO  CTS_SMMCntm  AMRF016A # Engineering

+000_07:57:00       MIRO  Engineering  AMRF003A # Power Off MIRO via OBCP

#=======================================END=============================================#