ROSINA Mode Change Commands B. Fiethe Institut fur Datentechnik TU Braunschweig {| TABLE !Document Reference : !!ROS-TUB-MA-05/2.3 ! |- |Issue: 2 ||Rev.: 3 |- |Date: 05.09.2001 ||Pages: |} {| TABLE !Prepared: !!s. above !!05.09.2001 !! ! |- | || || || |- |Approved: ||K. Altwegg || || |} {| TABLE !Distribution List !! ! |} Internal Holders Name / Department|Copies|For {| TABLE ! !! !!Approval !!Acceptance !!Information ! |- |K. Altwegg ||1 ||x || || |} External Holders Name, Company / Department|Copies|For {| TABLE ! !! !!Approval !!Acceptance !!Information ! |- |B. Fiethe, TU Braunschweig / IDA ||1 || ||x || |- |C. Prato, Alenia ||1 || || ||x |} Document Change Record| {| TABLE !Issue !!Rev. !!Pages changed, added, removed !!Date !!Reasons for Changes !!R viewer ! |- |1 ||0 ||All ||21.05.2001 ||Initial Issue ||- |- |2 ||0 ||All ||10.07.2001 ||Change to FM Database ||Bjoern |- |2 ||1 ||5-7 ||17.07.2001 ||Change Sensor parameter values ||Bjoern |- |2 ||2 ||6, 7 ||23.08.2001 ||Update after FM bench test ||Rev.1 |- |2 ||3 ||6, 7 ||05.09.2001 ||Temp. Range changed to full ops range, Parameter of NRNAG32F changed, DFMS NRNAG3A4 changed ||Rev.2 |} Table of Contents 1. Introduction 4 1.1 Applicable Documents 4 1.2 Reference Documents 4 2. EQM Mode Change Procedure 5 {{{1. Introduction}}} The scope of this document is to provide the inputs to a general Mode Change c ntrol file for system level tests of the ROSINA experiment. {{1.1 Applicable Documents}} {| TABLE !AD1 !!RO-EST-RS-3001/EID A Issue 2 !!ROSETTA Experiment Interface Document Pa t A ! |- |AD2 ||RO-EST-RS-3013/EID B Issue 1 ||ROSETTA - ROSINA Experiment Interface Do ument Part B |- |AD3 ||RO-ALS-TN-4003 ||EID-C Part 9, Payload Test Specification |} {{1.2 Reference Documents}} {| TABLE !RD1 !!ROS-TP-1016 !!ROSINA-DFMS Bench Test Procedure ! |- |RD2 ||ROS-TP-1020 ||ROSINA-COPS Bench Test Procedure |- |RD3 ||ROS-TP-1012 ||ROSINA-RTOF Bench Test Procedure |- |RD4 ||ROS-TP-1019 ||ROSINA Bench Test Procedure |- |RD5 ||ROS-TP-1023 ||ROSINA IST Inputs |- |RD6 ||ROS-TP-1021 ||ROSINA Input to I&T and UFT |} {{{2. FM Mode Change Procedure}}} Project: ROSINA Model: EQM|Test Procedure Name: Pass/Fail criteria(a):|R0.1.1 Mode Change Execution and Verification of general mode change command Test Step|Nominal value|Actual value|Remarks {| TABLE !1 !!Get current Mode (HK parameter NRNDP116) and set parameters. Mode: HK1: PARA3: DPU D4 YRNP1001 0xD400 DPU D2 YRNP1001 0xD200 COPS G5 YRNC1001 0xF500 COPS S5 YRNC1001 0xA500 DFMS G2 YRND1001 0xF200 RTOF G1 YRNR1001 0xF100 RTOF S1 YRNG1003 0xA100 RTOF 1G YRNG1003 0x0100 ALL G4 YRNG1005 0xF400 ALL S4 YRNG1005 0xA400 ALL 4 YRNG1005 0x0400 !! !! !! ! |- |2 ||Get new Mode and set parameters. Mode: PARA1: PARA2: DPU D4 0x80D4 0xD400 DPU D2 0x80D2 0xD200 COPS G5 0x80F5 0xF500 COPS S5 0x80A5 0xA500 DFMS G2 0x80F2 0xF200 RTOF G1 0x80F1 0xF100 RTOF S1 0x80A1 0xA100 RTOF 1G 0x8201 0x0100 ALL G4 0x80F4 0xF400 ALL S4 0x80A4 0xA400 ALL 4 0x8004 0x0400 || || || |- |3 ||Send "Set Mode" command to DPU (ZRNP4001) with PRNGP401 = PARA1, PRNGP402 = 0, PRNGP403 = 0, PRNGP404 = 0, PRNGP405 = 0) || || || |- |4 ||Verify that command was accepted and executed ||Passed: Acceptance & Execution Report || || |- |5 ||Verify that DPU Cmd Counter increases in HK report (HK1: NRNAP103 incremented by 1, NRNAP104 still 0) ||Passed: NRNAP103 = + 1, NRNAP104 = 0 || || |- |6 ||Verify that operation mode change event report (EID 44005) was generated (YRNG3005 with NRNAG304 = 0xABE5, NRNAG305 = 0xD000, NRNAG31B = PARA2, NRNAG3A0 = 0xXXXX, NRNAG31C = 0xXXXX, NRNAG3A1 = 0xXXXX, NRNAG31D = 0xXXXX, NRNAG3A2 = 0xXXXX, NRNAG31E = 0xXXXX, NRNAG3A3 = 0xXXXX, NRNAG31F = PARA3, NRNAG320 = 0xXX00) ||Passed: YRNG3005 Event Packet || || |- |7 ||If current Mode = DPU D4, DPU D2 AND if new Mode = COPS G5, COPS S5, RTOF S1, ALL G4, ALL S4: (YRNG3006 with NRNAG304 = 0xABE6, NRNAG322 = 0xCC40, NRNAG323 = 0, NRNAG324 = 0, NRNAG325 = 0, NRNAG326 0, NRNAG327 0x001C, NRNAG328 0x0019, NRNAG329 0x018F, NRNAG32A 0x0018, NRNAG32B 0x000B, NRNAG32C = 0x022B..0x031A, NRNAG32D = 0x022B..0x031A, NRNAG32E = 0x0100, NRNAG3A4 = 0, NRNAG32F = PARA2, NRNAG330 = 0) ||Passed: YRNG3006 Event Packet || || |- |8 ||If current Mode = DPU D4, DPU D2, COPS S5 AND if new Mode = DFMS G2, ALL 4, ALL S4: (YRNG3006 with NRNAG304 = 0xABE6, NRNAG322 = 0xC441, NRNAG323 = 0, NRNAG324 = 0, NRNAG325 = 0, NRNAG326 0, NRNAG327 7, NRNAG328 11, NRNAG329 0x3770, NRNAG32A 0x3585, NRNAG32B 0x3fff, NRNAG32C 0x1FFF, NRNAG32D = 0..0x0100, NRNAG32E = 0x0100, NRNAG3A4 = 0..2, NRNAG32F = PARA2, NRNAG330 = 0) ||Passed: YRNG3006 Event Packet || || |- |9 ||If current Mode = DPU D4, DPU D2, COPS S5 AND if new Mode = RTOF G1, RTOF S1, ALL G4, ALL S4: (YRNG3006 with NRNAG304 = 0xABE6, NRNAG322 = 0xC801, NRNAG323 = 0, NRNAG324 = 0, NRNAG325 = 0, NRNAG326 0, NRNAG327 0x324A, NRNAG328 0x31F8, NRNAG329 = 0x3EC4..0x3FAC, NRNAG32A = 0x00XX or 0x3FXX, NRNAG32B 0x3FF7, NRNAG32C = 0x2888..0x3DDE, NRNAG32D = 0x1D88..0x24A0, NRNAG32E = 0x0100, NRNAG3A4 = 0, NRNAG32F = PARA2, NRNAG330 = 0) ||Passed: YRNG3006 Event Packet || || |}