PDS_VERSION_ID                        = PDS3
DESCRIPTION                           = "Description of the sequence of sweep
voltage bias steps. D_SWEEP_P1_RAW_16BIT_BIP."
LABEL_REVISION_NOTE                   = "
    2018-11-12, EJ: Descriptions clean-up, lowercase
    2018-11-27, EJ: Updated global DESCRIPTIONs
    2019-02-04, EJ: Command block-->macro block"
RECORD_TYPE                           = FIXED_LENGTH
RECORD_BYTES                          = 32
FILE_RECORDS                          = 208
FILE_NAME                             = "LAP_20151218_113212_805_B1S.LBL"
^TABLE                                = "LAP_20151218_113212_805_B1S.TAB"
DATA_SET_ID                           = "RO-C-RPCLAP-3-ESC4-CALIB2-V1.0"
DATA_SET_NAME                         = "ROSETTA-ORBITER 67P RPCLAP 3 ESC4
CALIB2 V1.0"
DATA_QUALITY_ID                       = "1"
MISSION_ID                            = ROSETTA
MISSION_NAME                          = "INTERNATIONAL ROSETTA MISSION"
MISSION_PHASE_NAME                    = "COMET ESCORT 4"
PRODUCER_INSTITUTION_NAME             = "SWEDISH INSTITUTE OF SPACE PHYSICS,
UPPSALA"
PRODUCER_ID                           = EJ
PRODUCER_FULL_NAME                    = "ERIK P G JOHANSSON"
PRODUCT_ID                            = "LAP_20151218_113212_805_B1S"
PRODUCT_TYPE                          = "RDR"
PRODUCT_CREATION_TIME                 = 2019-12-08T07:29:50.371
INSTRUMENT_HOST_ID                    = RO
INSTRUMENT_HOST_NAME                  = "ROSETTA-ORBITER"
INSTRUMENT_NAME                       = "ROSETTA PLASMA CONSORTIUM - LANGMUIR
PROBE"
INSTRUMENT_ID                         = RPCLAP
INSTRUMENT_TYPE                       = "PLASMA INSTRUMENT"
INSTRUMENT_MODE_ID                    = MCID0X0805
INSTRUMENT_MODE_DESC                  = "Density P1 NM, LDL, Fix Bias -22V,
Cont. A20 down 64, Sweeps P1 +-30V"
TARGET_NAME                           = "67P/CHURYUMOV-GERASIMENKO 1 (1969
R1)"
TARGET_TYPE                           = "COMET"
PROCESSING_LEVEL_ID                   = "3"
START_TIME                            = 2015-12-18T11:32:12.749
STOP_TIME                             = 2015-12-18T11:58:54.176
SPACECRAFT_CLOCK_START_COUNT          = "1/0409059051.15680"
SPACECRAFT_CLOCK_STOP_COUNT           = "1/409060652.43649"
ROSETTA:LAP_TM_RATE                   = "NORMAL"
ROSETTA:LAP_BOOTSTRAP                 = "ON"
ROSETTA:LAP_FEEDBACK_P1               = "DENSITY"
ROSETTA:LAP_P1_ADC20                  = "DENSITY"
ROSETTA:LAP_P1_ADC16                  = "DENSITY"
ROSETTA:LAP_P1_RANGE_DENS_BIAS        = "+-32"
ROSETTA:LAP_P1_STRATEGY_OR_RANGE      = "GAIN 1"
ROSETTA:LAP_P1_RX_OR_TX               = "ANALOG INPUT"
ROSETTA:LAP_P1_ADC16_FILTER           = "8 KHZ"
ROSETTA:LAP_P1_SWEEP_PLATEAU_DURATION = "0x0080"
ROSETTA:LAP_P1_SWEEP_STEPS            = "0x00d0"
ROSETTA:LAP_P1_SWEEP_START_BIAS       = "0x0028"
ROSETTA:LAP_P1_SWEEP_FORMAT           = "UP"
ROSETTA:LAP_P1_SWEEP_RESOLUTION       = "COARSE"
ROSETTA:LAP_P1_SWEEP_STEP_HEIGHT      = "0x0001"
ROSETTA:LAP_P1_ADC16_DOWNSAMPLE       = "0x0080"
ROSETTA:LAP_SWEEPING_P1               = "YES"
ROSETTA:LAP_P1_FINE_SWEEP_OFFSET      = "0x0000"
^ARCHIVE_CONTENT_DESC                 = "RO-IRFU-LAP-EAICD.PDF"
^RPC_SCIENCE_USAGE_DESC               = "RPC_USER_GUIDE.PDF"
^RPCLAP_SCIENCE_USAGE_DESC            = "RO-IRFU-LAP-UG.PDF"

OBJECT = TABLE
    INTERCHANGE_FORMAT = ASCII
    ROWS               = 208
    COLUMNS            = 2
    ROW_BYTES          = 32
    DESCRIPTION        = "Table of relative time within sweep, and
corresponding voltage bias. This table is shared for all sweeps on the same
probe and is associated with the sweep data in file
LAP_20151218_113212_805_I1S.TAB."

    OBJECT = COLUMN
        NAME        = SWEEP_TIME
        START_BYTE  = 1
        BYTES       = 14
        DATA_TYPE   = ASCII_REAL
        FORMAT      = "E14.7"
        UNIT        = "SECOND"
        DESCRIPTION = "Elapsed time (s/c clock time) from first sweep
measurement."
    END_OBJECT = COLUMN

    OBJECT = COLUMN
        NAME        = P1_VOLTAGE
        START_BYTE  = 17
        BYTES       = 14
        DATA_TYPE   = ASCII_REAL
        FORMAT      = "E14.7"
        UNIT        = "VOLT"
        DESCRIPTION = "Calibrated voltage bias."
    END_OBJECT = COLUMN

END_OBJECT = TABLE

END