PDS_VERSION_ID = PDS3 LABEL_REVISION_NOTE = "2012-06-25 Andrew J. Steffl (SwRI) " RECORD_TYPE = STREAM OBJECT = DATA_SET DATA_SET_ID = "RO-CAL-ALICE-2-RVM1-V1.0" OBJECT = DATA_SET_INFORMATION DATA_SET_NAME = "ROSETTA-ORBITER CAL ALICE 2 RVM1 V1.0" DATA_SET_TERSE_DESC = "Uncalibrated instrument data from the Rosetta Orbiter ALICE instrument during the RVM1 mission phase" ABSTRACT_DESC = "This data set contains CODMAC level 2 data acquired by the Rosetta Orbiter ALICE UV Spectrometer during the rendezvous manoeuvre 1 mission phase, which took place between 2010-09-04 and 2011-07-13." CITATION_DESC = "Stern, S. A., et al., ROSETTA-ORBITER CAL ALICE 2 RVM1 V1.0 RO-CAL-ALICE-2-RVM1-V1.0, NASA Planetary Data System, 2012." ARCHIVE_STATUS = "LOCALLY ARCHIVED" DATA_SET_COLLECTION_MEMBER_FLG = "N" DETAILED_CATALOG_FLAG = "N" DATA_OBJECT_TYPE = {"IMAGE", "TABLE", "SERIES"} DATA_SET_RELEASE_DATE = 2012-06-25 PRODUCER_FULL_NAME = "ANDREW J. STEFFL" START_TIME = 2010-12-04T01:01:09.506 STOP_TIME = 2011-03-07T07:25:27.226 DATA_SET_DESC = " Required Reading ================ The format of all Alice data are described in detail by the EAICD document located in the /DOCUMENT directory. In addition, the Rosetta Alice logbook file, RA_LOGBOOK_NNN.ASC, also located in the DOCUMENT directory provides observational details such as observation target, commanded exposure time, etc., for all Alice data. The Alice team strongly recommends reading this documentation before using the data. Data Set Overview ================= This data set contains uncalibrated data acquired by the Rosetta Orbiter ALICE UV Spectrometer during the rendezvous manoeuvre 1 mission phase, which took place between 2010-09-04 and 2011-07-13. A detailed listing of all Alice observations is given in the observation log file located in the DOCUMENT directory. The following Alice observations were made during the period covered by this data set: # 2010-12-04: Passive Payload Checkout #13 (PC13) # NOTE: starting in PC9 we removed the second door performance test from # the nominal passive checkout OIOR, so AALS404A is called only once. # @ 2010-12-04T01:00:00.00 | AALS102A | Nominal Power up v06 @ 2010-12-04T01:00:00.00 | ZSKA8011 | Alice ON OBCP; running in EEPROM 0 @ 2010-12-04T01:02:55.00 | AALS604A | ALICE Mask Trend v02 @ 2010-12-04T01:10:00.00 | AALS104A | Power up chk passive v02 X 2010-12-04T01:13:10.00 | Dark | 300 sec. Pixel Time, hack interval = 1/64s (AALS104A checkout) X 2010-12-04T01:21:20.00 | Test Image | 10 sec. Histogram (AALS104A checkout) @ 2010-12-04T01:24:00.00 | ZAL19223 | Alice self test @ 2010-12-04T01:50:00.00 | AALS703A | Full Mem check v01 @ 2010-12-04T02:10:00.00 | AALS404B | Alice Door Life Test v07 @ 2010-12-04T03:15:00.00 | AALS103A | ALICE Off v01 @ 2010-12-04T03:15:30.00 | ZSKA8012 | Alice OFF OBCP # #----------------------------------------------------------------------------- # # 2011-03-06: Alice pre-hibernation button-up ops # # First, a standard Passive Checkout (OIOR_PI1RSO_D_0000_AL_PC____.ITL) @ 2011-03-06T07:00:00.00 | AALS102A | Nominal Power up v06 @ 2011-03-06T07:00:00.00 | ZSKA8011 | Alice ON OBCP; running in EEPROM 0 @ 2011-03-06T07:02:55.00 | AALS604A | ALICE Mask Trend v02 @ 2011-03-06T07:05:00.00 | AALS104A | Power up chk passive v02 X 2011-03-06T07:08:10.00 | Dark | 300 sec. Pixel Time, hack interval = 1/64s (AALS104A checkout) X 2011-03-06T07:16:20.00 | Test Image | 10 sec. Histogram (AALS104A checkout) @ 2011-03-06T07:19:00.00 | ZAL19223 | Alice self test @ 2011-03-06T07:45:00.00 | AALS703A | Full Mem check v01 @ 2011-03-06T08:05:00.00 | AALS404B | Alice Door Life Test v07 # # AL02: Alice decontamination (OIOR_PI1RSO_D_0000_AL_02____.ITL) @ 2011-03-06T08:25:00.00 | AALS303A | HV-Off v02 @ 2012-03-06T08:25:10.00 | AALS201A | Start Optics Decon v03 @ 2012-03-07T06:25:00.00 | AALS201B | End Optics Decon v03 @ 2011-03-07T07:25:00.00 | AALS103A | ALICE Off v01 @ 2011-03-07T07:25:30.00 | ZSKA8012 | Alice OFF OBCP # # Confirmed that Alice is OFF and aperture door is CLOSED. # Alice is buttoned-up for hibernation... Processing ========== The data in this data set are uncalibrated, CODMAC Level 2 data. As such, corrections for detector dead time, dark counts, flatfield, and effective area have not been applied. The primary FITS header contains a list of which corrections have been applied to that file. Data ==== The data are in FITS format and text format. Each FITS file has a detached PDS label so that they can be read either by FITS or PDS tools. A detailed description of the data format is given in the ALICE EAICD document located in the DOCUMENT directory of this data set. Ancillary Data ============== No ancillary data included in this data set. Coordinate System ================= The geometry items SC_SUN_POSITION_VECTOR, SC_TARGET_POSITION_VECTOR and SC_TARGET_VELOCITY_VECTOR provided in the label of the data product are relative to the Earth Mean Equator frame of J2000. SUB_SPACECRAFT_LATITUDE, SUB_SPACECRAFT_LONGITUDE are given in the PLANETOGRAPHIC coordinate system. These parameters are computed at time t=START_TIME. Distances are given in km, angles in degrees. Software ======== All FITS readers should be able to successfully read the data. " CONFIDENCE_LEVEL_NOTE = " Confidence Level Overview ========================= Data confidence is nominal, meaning that all data have been validated by the Alice team and found as expected. Any exceptions are noted by the DATA_QUALITY field in the label files. Review ===== Data Coverage and Quality ========================= Data quality is good unless otherwise noted by the DATA_QUALITY keyword. Limitations =========== These data have not been calibrated and are in instrumental units" END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_MISSION MISSION_NAME = "INTERNATIONAL ROSETTA MISSION" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_TARGET TARGET_NAME = "CALIBRATION" END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = "RO" INSTRUMENT_ID = "ALICE" END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "STERNETAL2007" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END