PDS_VERSION_ID = PDS3 LABEL_REVISION_NOTE = "V1.0" RECORD_TYPE = STREAM OBJECT = DATA_SET DATA_SET_ID = "RO-X-GIA-2-RVM1-RENDEZMANOEUVRE1-V1.0" OBJECT = DATA_SET_INFORMATION DATA_SET_NAME = " ROSETTA-ORBITER CHECK GIADA 2 RVM1 RENDEZMANOEUVRE1 V1.0" CITATION_DESC = " A. Rotundi and the International GIADA Consortium, RO-X-GIA-2-RVM1-RENDEZMANOEUVRE1-V1.0, NASA Planetary Data System, 2011." ABSTRACT_DESC = " Payload Checkout 13 (PC13) was the final Cruise Phase Checkout of several payload checkouts performed with the Rosetta Payload. Since PC13 was scheduled as the final Cruise Phase Checkout, a number of additional payload operations were also executed to close out pending and essential requirements, and/or configure instruments for the upcoming Deep Space Hibernation Phase. Given the importance of this final checkout all Rosetta payload, except Osiris, took part in this scenario The Payload Checkout 13 ran for 9 consecutive days starting on the 1st December 2010 until the 9th December 2010. An RSI passive checkout was also completed on 14th December 2010. The Scenario was covered by dedicated NNO and DSN. During PC13 GIADA performs only a passive test (GD01) similar to the previous Passive Payload Checkouts. This passive test (GD01), which includes standard procedures and full functional verification, was executed by switching on Main and Redundant I/Fs in sequence and executing similar procedures for the two cases. The data reported in this data set have been converted from ADC counts to engineering values. The quality of the Housekeeping and Calibration data is good. Scientific data are due to noise, as no grain event is expected during this mission phase. These data must be only considered to evaluate GIADA behaviour and not as real scientific data. Data reported by GDS and IS are due to noise as no dust event is expected during this mission phase. MBS frequency changes, once normalised for frequency vs. temperature dependence, if present, are due to deposition of contaminants existing in the S/C environment. Housekeeping and Calibration data from all GIADA sub-systems are useful to evaluate instrument health and behaviour when compared with similar data acquired during other mission phases." DATA_SET_TERSE_DESC = " Volume containing data from 'Cruise 5' and more specifically: 'Passive Payload Checkout 13' (PC13) - 1-12-2010 and 9-12-2010." CONFIDENCE_LEVEL_NOTE = " The data reported in this data set have been converted from ADC counts to engineering values. The quality of the Housekeeping and Calibration data is good. Scientific data are due to noise, as no grain event is expected during this mission phase. These data must be only considered to evaluate GIADA behaviour and not as real scientific data. See RO_GIA_OACUPA_RP_115_1 (reported in DOCUMENTation dir) for evaluations on GIADA behaviour during this mission phase." DATA_SET_DESC = " The format of data reported in GIADA data sets is the same for all mission phases. Data reported by GDS and IS are due to noise as no dust event is expected in this mission phase. MBS frequency changes, once normalised for frequency vs. temperature dependence, if present, are due to deposition of contaminants existing in the S/C environment. Housekeeping and Calibration data from all GIADA sub-systems are useful to evaluate instrument health and behaviour when compared with similar data acquired during other mission phases." ARCHIVE_STATUS = "LOCALLY ARCHIVED" DATA_OBJECT_TYPE = TABLE DATA_SET_RELEASE_DATE = 2011-02-15 DATA_SET_COLLECTION_MEMBER_FLG = N DETAILED_CATALOG_FLAG = N PRODUCER_FULL_NAME = "GIADA TEAM" START_TIME = 2010-12-05T06:16:12.473 /* Beginning with the first HK packet of the whole mission phase */ STOP_TIME = 2010-12-06T20:40:45.987 /* Ending with the last HK packet of the whole mission phase */ END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_MISSION MISSION_NAME = "INTERNATIONAL ROSETTA MISSION" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = RO INSTRUMENT_ID = GIADA END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_TARGET TARGET_NAME = CHECKOUT END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "COLANGELIETAL2007" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END